Ford Explorer 2011 Owner's Manual page 48

Instrument Cluster
NO KEY DETECTED (if equipped) — Displayed if the Intelligent
Access Key is not detected by the system in the following three
scenarios:
• When the start/stop button is pressed in an attempt to either start the
engine or cycle through the ignition states.
• When the engine is running and a door is opened then closed.
•When the vehicle's speed exceeds 10 mph (16 km/h) for the first time
after starting. Refer to Push button start system in the Driving chapter
for more information.
PRESS BRAKE TO START (if equipped) — Displayed when the
start/stop button is pressed without the brake pedal being applied. This
is a reminder that the brake pedal must be applied when the start/stop
button is pressed in order to start the engine.
RESTART NOW OR KEY IS NEEDED (if equipped) — Displayed
when the start/stop button is pressed to shut off the engine and a
Intelligent Access Key is not detected inside the vehicle. Refer to Push
button start system in the Driving chapter for more information.
SPEED LIMITED TO 130 KM/H — Displayed when starting the
vehicle and MyKey is in use and the MyKey speed limit is on. Refer to
MyKey in the Locks and Security chapter for more information.
SPEED LIMITED TO 80 MPH — Displayed when starting the vehicle
and MyKey is in use and the MyKey speed limit is on. Refer to MyKey
in the Locks and Security chapter for more information.
STARTING SYSTEM FAULT — This message is displayed when there
is a problem with your vehicle's starting security system; your vehicle
will not be able to start. See your authorized dealer for service.
VEHICLE AT TOP SPEED OF MYKEY SETTING — Displayed when
a MyKey is in use and the MyKey speed limit is on and the vehicle
speed is 80 mph (130 km/h). Refer to MyKey in the Locks and
Security chapter for more information.
VEHICLE NEAR MYKEY TOP SPEED — Displayed when a MyKey
is in use and the MyKey speed limit is on and the vehicle speed is
approaching 80 mph (130 km/h). Refer to MyKey in the Locks and
Security chapter for more information.
ADAPTIVE CRUISE MALFUNCTION (if equipped) — Displayed
when a radar malfunction is preventing the ACC from engaging.
ADAPTIVE CRUISE NOT AVAILABLE (if equipped) — Displayed
when conditions exist such that the adaptive cruise cannot function
properly.
48
2011 Explorer (exp)
Owners Guide, 3rd Printing
USA (fus)