Gearshift Lever Toggle Switch; Recommended Shift Speeds; Hill Start Assist (Hsa) - Ford Explorer 2011 Owner's Manual

Driving
the ability for the driver to change gears up or down. By moving the
gearshift lever from D (Drive) to M (Manual), you now have control of
selecting the gear you desire using the toggle switch on the gearshift
lever.

Gearshift lever toggle switch

• To manually downshift the
transmission with the gearshift
lever in M (Manual), press – on
the gearshift lever.
• To manually upshift the
transmission with the gearshift
lever in M (Manual), press + on
the gearshift lever.

Recommended shift speeds

Upshift according to the following chart:
Upshifts when accelerating (recommended for best fuel
1 - 2
2 - 3
3 - 4
4 - 5
5 - 6
The message center display in the instrument cluster will show the
current selected gear you are in.
In order to prevent the engine from running at too low an RPM, which
may cause it to stall, the SST will automatically make some downshifts
even if it has determined that you have not downshifted in time. It will
still allow you to downshift at any time as long as the SST determines
that the engine will not be damaged from over-revving.
Engine damage may occur if excessive engine revving is held
without shifting.

Hill start assist (HSA)

The hill start assist feature makes it easier to pull away when the vehicle
is on a slope without the need to use the parking brake. When the hill
292
2011 Explorer (exp)
Owners Guide, 3rd Printing
USA (fus)
economy)
Shift from:
15 mph (24 km/h)
25 mph (40 km/h)
40 mph (64 km/h)
45 mph (72 km/h)
50 mph (80 km/h)