Display Mode - Ford Explorer 2011 Owner's Manual

Instrument Cluster
To change the Menu Control between Standard or Memory On, refer to
Vehicle and Menu Control found in the table under the Settings section
later in this chapter.

Display Mode

Press the right arrow on the left steering wheel mounted button when
display mode is selected. The boxes in the upper right corner of the
screen indicate that there are multiple screens that you can navigate
through. Each press of the right arrow will navigate to the next screen
until the last screen is reached. The white highlighted box indicates
which of the screens you are currently viewing:
Distance to empty (DTE) + Fuel
gauge + Bar tachometer
• Distance to empty (DTE): Shows approximate fuel level before the
fuel tank reaches empty. The value is dynamic and can change (raise
or lower) depending on driving style.
• Fuel gauge: Indicates approximately how much fuel is left in the fuel
tank. The fuel gauge may vary slightly when the vehicle is in motion
or on a grade. When the fuel level becomes low (50 miles [80 km] to
empty), the level indicator will change to amber. When the fuel level
becomes critically low (0 miles [0 km] to empty), the level indicator
will change to red.
Note: When a MyKey is in use, low fuel warnings will display earlier .
• Bar tachometer: Indicates the engine speed in revolutions per minute.
Driving with your tachometer pointer continuously at the top of the
scale may damage the engine.
Note: You can also choose to have only the fuel gauge show in this
mode. Refer to Display > Gauge Display found in the table under the
Settings section later in this chapter.
36
2011 Explorer (exp)
Owners Guide, 3rd Printing
USA (fus)
01234.5mi
6
F
4
RPM
1000
2
0
E