Ford Explorer 2011 Owner's Manual page 32

Hide thumbs Also See for Explorer 2011:
Table of Contents

Advertisement

Instrument Cluster
RESTART NOW OR KEY IS NEEDED (if equipped) — Displayed
when the start/stop button is pressed to shut off the engine and a
Intelligent Access Key is not detected inside the vehicle. Refer to Push
button start system in the Driving chapter for more information.
SPEED LIMITED TO 130 KM/H — Displayed when starting the
vehicle and MyKey is in use and the MyKey speed limit is on. Refer to
MyKey in the Locks and Security chapter for more information.
SPEED LIMITED TO 80 MPH — Displayed when starting the vehicle
and MyKey is in use and the MyKey speed limit is on. Refer to MyKey
in the Locks and Security chapter for more information.
STARTING SYSTEM FAULT — This message is displayed when there
is a problem with your vehicle's starting security system; your vehicle
will not be able to start. See your authorized dealer for service.
VEHICLE AT TOP SPEED OF MYKEY SETTING — Displayed when
a MyKey is in use and the MyKey speed limit is on and the vehicle
speed is 80 mph (130 km/h). Refer to MyKey in the Locks and
Security chapter for more information.
VEHICLE NEAR TOP SPEED — Displayed when a MyKey is in use
and the MyKey speed limit is on and the vehicle speed is approaching
80 mph (130 km/h). Refer to MyKey in the Locks and Security
chapter for more information.
BLIND SPOT NOT AVAILABLE SENSOR BLOCKED (if equipped)
— Displayed when the blind spot information system/cross traffic alert
system sensors are blocked. See Blind Spot Information System
(BLIS ) with Cross Traffic Alert in the Driving chapter.
BLIND SPOT SYSTEM FAULT (if equipped) — Displayed when a
fault with the blind spot information system has occurred. Contact your
authorized dealer as soon as possible.
CROSS TRAFFIC NOT AVAILABLE SENSOR BLOCKED (if
equipped) — Displayed when the blind spot information system/cross
traffic alert system sensors are blocked. See Blind Spot Information
System (BLIS ) with Cross Traffic Alert in the Driving chapter.
CROSS TRAFFIC SYSTEM FAULT (if equipped) — Displayed when
a fault with the cross traffic alert system has occurred. Contact your
authorized dealer as soon as possible.
VEHICLE COMING FROM LEFT (if equipped) — Displayed when
the blind spot information system with cross traffic alert (CTA) system is
operating and senses a vehicle. See Blind Spot Information System
(BLIS ) with Cross Traffic Alert in the Driving chapter.
32
2011 Explorer (exp)
Owners Guide, 3rd Printing
USA (fus)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents