Stowing The Mini-Spare And Jack - Ford Explorer 2011 Owner's Manual

Hide thumbs Also See for Explorer 2011:
Table of Contents

Advertisement

Roadside Emergencies
3. Put the jack in the jack notch
next to the tire you are changing.
Turn the jack handle clockwise until
the wheel is completely off the
ground.
4. Remove the lug nuts with the lug
wrench.
5. Replace the flat tire with the
spare tire, making sure the valve
stem is facing outward. Reinstall the
lug nuts until the wheel is snug against the hub. Do not fully tighten the
lug nuts until the wheel has been lowered.
6. Lower the wheel by turning the jack handle counterclockwise.
7. Remove the jack and fully tighten
the lug nuts in the order shown.
Refer to Wheel lug nut torque
specifications later in this chapter
for the proper lug nut torque
specification.

Stowing the mini-spare and jack

1. Replace the wheel chock in the foam tray.
2. Adjust the jack to the proper
height to install the wrench. Turn
the jack lead screw until the arrow
on the upper link is slightly below
the circle indicator shown on the
lower link.
342
2011 Explorer (exp)
Owners Guide, 3rd Printing
USA (fus)
1
3
4
5
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents