Ford Explorer 2011 Owner's Manual page 225

The tether strap anchors in your vehicle are in the following positions
(shown from top view):
• Second row bucket seats and
rear seat
• Second row bench seats and
rear seat
Attach the tether strap only to the appropriate tether anchor as shown.
The tether strap may not work properly if attached somewhere other
than the correct tether anchor.
Once the child safety seat has been installed, using either the safety belt,
the lower anchors of the LATCH system, or both, you can attach the top
tether strap.
If you install a child seat with rigid LATCH attachments, do not tighten
the tether strap enough to lift the child seat off the vehicle seat cushion
when the child is seated in it. Keep the tether strap just snug without
lifting the front of the child seat. Keeping the child seat just touching the
vehicle seat gives the best protection in a severe crash.
2011 Explorer (exp)
Owners Guide, 3rd Printing
USA (fus)
Seating and Safety Restraints
225