Ford Escape Hybrid 2006 Owner's Manual page 305

Item Ford Part
Name or
equivalent
Automatic eCVT Motorcraft
2
transaxle MERCON
Multi-Purpose
ATF
Rear axle Motorcraft SAE
4
(4WD) 80W-90
Premium Rear
Axle Lubricant
Power Transfer Motorcraft SAE
3
Unit (4WD) 75W-140 High
Performance
Rear Axle
Lubricant
Windshield Motorcraft
washer fluid Premium
Windshield
Washer
Concentrate
1
DO NOT USE Motorcraft Specialty Orange Engine Coolant VC-2. Refer
to Adding engine coolant, in the this chapter.
2
Using any transmission fluid other than those that meet the
recommended specification may cause internal transaxle damage. Do
NOT use Motorcraft MERCON CVT (blue) ATF. This vehicle uses only
Motorcraft MERCON ATF.
3
The Power Transfer Unit is lubricated for life with synthetic lube.
Lubricant levels are not to be checked or changed unless a leak is
suspected or repair required. Replace Power Transfer Unit lubricant with
specified synthetic lubricant anytime the unit is submerged in water.
4
4WD vehicles exposed for prolonged periods to temperatures less than
–40° C (-40° F) should change out the rear axle fluid to Motorcraft SAE
75W-140 High Performance Rear Axle Lubricant, Ford part number
XY-75W140–QL meeting Ford specification WSL-M2C192–A.
REVIEW COPY ——
2006 Escape Hybrid (ehv), Owners Guide (post-2002-fmt) (own2002), Market: USA (fus)
Maintenance and Specifications
Ford Part
Number
XT-2-QDX
XY-80W90-QL
XY-75W140–QL
ZC-32–A
Ford
Specification
MERCON
WSP-M2C197-A
WSL-M2C192-A
WSB-M8B16–A2
305