Low Voltage Battery - Ford Escape Hybrid 2006 Owner's Manual

Hide thumbs Also See for Escape Hybrid 2006:
Table of Contents

Advertisement

When changing the oil filter you must also replace the filter cap O-ring.
The oil filter drain plug O-ring must also be replaced whenever the oil filter
drain plug is removed. Re-use of the O-rings may cause engine oil leakage
and may result in severe engine damage. The customer warranty may be
voided for any damage to the engine if the O-rings are not replaced.
Ford production and aftermarket (Motorcraft) oil filters are designed for
added engine protection and long life. If a replacement oil filter is used
that does not meet Ford material and design specifications, start-up
engine noises or knock may be experienced. It is recommended you use
the appropriate Motorcraft oil filter (or another brand meeting Ford
specifications) for your engine application.
LOW VOLTAGE (UNDERHOOD) BATTERY
Your vehicle is equipped with a
Motorcraft maintenance-free battery
which normally does not require
additional water during its life of
service.
However, for severe usage or in high temperature climates, check the
battery electrolyte level. Refer to scheduled maintenance for the
service interval schedules.
Keep the electrolyte level in each cell up to the "level indicator".
Do not overfill the battery cells.
If the electrolyte level in the battery is low, you can add plain tap water
to the battery, as long as you do not use hard water (water with a high
mineral or alkali content). If possible, however, try to only fill the battery
cells with distilled water. If the battery needs water often, have the
charging system checked.
If your battery has a cover/shield, make sure it is reinstalled
after the battery has been cleaned or replaced.
For longer, trouble-free operation, keep the top of the battery clean and
dry. Also, make certain the battery cables are always tightly fastened to
the battery terminals.
If you see any corrosion on the battery or terminals, remove the cables
from the terminals and clean with a wire brush. You can neutralize the
acid with a solution of baking soda and water.
REVIEW COPY ——
2006 Escape Hybrid (ehv), Owners Guide (post-2002-fmt) (own2002), Market: USA (fus)
Maintenance and Specifications
277

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents