NETGEAR WGR614v11 User Manual page 76

Table 1. Wireless Router Status Fields (Continued)
Field
MAC Address
IP Address
DHCP
IP Subnet Mask
Domain Name Server
LAN Port. The following settings apply to the Ethernet (LAN) port of the router.
MAC Address
IP Address
DHCP
IP Subnet Mask
76 | Chapter 6. Using Network Monitoring Tools
N150 Wireless Router WGR614v11 User Manual
Description
The Media Access Control address. This is the unique physical
address being used by the Internet (WAN) port of the router.
The IP address being used by the Internet (WAN) port of the router. If
no address is shown, or is 0.0.0.0, the router cannot connect to the
Internet.
If set to None, the router is configured to use a fixed IP address on
the WAN. If set to DHCP Client, the router is configured to obtain an
IP address dynamically from the ISP.
The IP subnet mask being used by the Internet (WAN) port of the
router. For an explanation of subnet masks and subnet addressing,
click the link to the online document
.
Appendix A
The Domain Name Server addresses being used by the router. A
Domain Name Server translates human-language URLs such as
www.netgear.com into IP addresses.
The Media Access Control address. This is the unique physical
address being used by the LAN port of the router.
The IP address being used by the Ethernet (LAN) port of the router.
The default is 192.168.1.1.
Identifies whether the router's built-in DHCP server is active for the
LAN-attached devices.
The IP subnet mask being used by the Ethernet (LAN) port of the
router. The default is 255.255.255.0.
TCP/IP Networking Basics in