Advertisement
Quick Links
Download this manual
See also:
Setup Manual
Wireless-G Router
Package Contents:
Wireless-G Router
WGR614v10
Resource CD
Wireless Router
Ethernet Cable
Power Adapter
Step 1:
Installation Guide
Connect your modem.
Internet
CAUTION:
MAKE SURE YOUR MODEM IS
TURNED OFF OR UNPLUGGED
BEFORE STARTING THE
INSTALLATION.
Step 2:
Connect your router.
DSL or Cable
Modem
Step 4:
Power on your modem.
Wait until your modem cycles on
(approximately 2 minutes).
Note:
If you have a battery-backed modem,
press the reset button. (In some cases, you may
need to remove, then re-insert, the battery to recycle
your modem.)
Step 3:
Connect your computer.
(not included)
Power on/off
Wireless Router
Step 5:
Power on your router.
Wait until the power LED
turns turns solid green.
Note:
CD drive, see
on the back to complete your router setup.
Laptop or Desktop
Computer
Wireless-N Router
WGR614v10
Resource CD
Step 6:
Insert your CD.
Click Setup and follow
the steps to set up a secure
wireless network.
If your laptop does not have a
"No CD Drive" Installation
Advertisement
Related Manuals for NETGEAR WGR614v10 - 54 Mbps Wireless Router
Summary of Contents for NETGEAR WGR614v10 - 54 Mbps Wireless Router
- Page 1 Step 1: Step 2: Step 3: Installation Guide Connect your modem. Connect your router. Connect your computer. Wireless-G Router Package Contents: Internet DSL or Cable (not included) CAUTION: MAKE SURE YOUR MODEM IS Power on/off TURNED OFF OR UNPLUGGED BEFORE STARTING THE INSTALLATION.
- Page 2 After connecting to the Internet, you can check for firmware updates by selecting trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without wireless devices connected to your router.