NETGEAR ProSafe SRX5308 Reference Manual page 206

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 127.
2. Complete the settings as explained the following table:
Table 52. SSL VPN client IP address range settings
Setting
Client IP Address Range
Enable Full Tunnel Support
DNS Suffix
Primary DNS Server
Secondary DNS Server
Virtual Private Networking Using SSL Connections
Description
Select this check box to enable full tunnel support. If you leave this check
box cleared (which is the default setting), split-tunnel support is enabled, and
you need to add client routes (see
page 207).
Note: When full tunnel support is enabled, client routes are not operable.
A DNS suffix to be appended to incomplete DNS search strings. This is
optional.
The IP address of the primary DNS server that is assigned to the VPN tunnel
clients. This is optional.
Note: If you do not assign a DNS server, the DNS settings remain
unchanged in the VPN client after a VPN tunnel has been established.
The IP address of the secondary DNS server that is assigned to the VPN
tunnel clients. This is optional.
206
Add Routes for VPN Tunnel Clients on