NETGEAR ProSafe SRX5308 Reference Manual page 185

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 113.
3. Change the name of the authentication phase (the default is Gateway):
a. Right-click the authentication phase name.
b. Select Rename.
c. Type GW_ModeConfig.
d. Click anywhere in the tree list pane.
Note: This is the name for the authentication phase that is used only for the
VPN client, not during IKE negotiation. You can view and change this name in
the tree list pane. This name needs to be a unique name.
The Authentication pane displays in the
Authentication tab selected by default.
Figure 114.
Virtual Private Networking Using IPSec Connections
Configuration Panel screen, with the
185