NETGEAR WNR2200 User Manual page 99

2. Select the Port Triggering radio button. The port triggering information displays.
Figure 6-8
3. Clear the Disable Port Triggering check box.
Note: If the Disable Port Triggering check box is selected after you configure port
triggering, port triggering is disabled. However, any port triggering
configuration information you added to the router is retained even though it is
not used.
4. In the Port Triggering Timeout field, enter a value up to 9999 minutes. This value controls
the inactivity timer for the designated inbound ports. The inbound ports close when the
inactivity time expires. This is required because the router cannot be sure when the application
has terminated.
Customizing Your Network Settings
N300 Wireless Router with USB WNR2200 User Manual
v1.0, May 2011
6-20