Specifying Approved Usb Devices - NETGEAR WNR2200 User Manual

Specifying Approved USB Devices

For more security, you can set up the router to share approved USB devices only.
1. Select USB Settings from the Advanced menu, and then click Approved Devices. The USB
Drive Approved Settings screen displays:
Figure 8-6
2. Select the USB device from the Available USB Devices list.
3. Click Add.
4. Select the Allow only approved devices check box.
5. Click Apply so that your change takes effect.
If you want to approve another USB device, you must first use the Safely Remove USB Device
button to unmount the currently connected USB device. Connect the other USB device, and then
repeat this process.
USB Storage
N300 Wireless Router with USB WNR2200 User Manual
v1.0, May 2011
8-11