NETGEAR WNR2200 User Manual page 55

2. From the Advanced menu, select Wireless Settings, and then click Set Up Access List to
display the Wireless Card Access List screen.
Figure 4-1
3. Click Add to add a wireless device to the wireless access control list. The Wireless Card
Access Setup screen opens and displays a list of currently active wireless cards and their
Ethernet MAC addresses.
Figure 4-2
4. Adjust the list as needed for your network. You can add devices using either of the following
methods:
• If the computer is in the Available Wireless Cards table, select the radio button of that
computer to capture its MAC address.
Protecting Your Network
N300 Wireless Router with USB WNR2200 User Manual
v1.0, May 2011
4-3