Updating Your Router Firmware - NETGEAR WNR2200 User Manual

If new firmware is available, click Yes, and the router will automatically upgrade itself with
4.
the latest firmware.
Do not try to go online, turn off the router, shut down the computer, or do anything
else to the router until the router finishes restarting and the Ready light has turned
solid green for several seconds!
5. From the main menu, select Setup Wizard.
Select No to set up the connection yourself. Click Next and the Basic Settings screen will
6.
display. Enter the required information for your ISP connection in the appropriate fields. If
you need assistance, follow the Basic Settings Help screens on the router interface or see the
online User Manual for this wireless router.
If you cannot connect to the wireless router, check the Internet Protocol
(TCP/IP) properties in the Network Connections section of your Control
Panel. It should be set to obtain both IP and DNS server addresses
automatically.
Click Apply to save your settings and complete your connection.
7.
You are now connected to the Internet! The N300 wireless router home page will display.
To complete your router setup and to configure your wireless network, see
Internet Connection" on page 2-1

Updating Your Router Firmware

NETGEAR is always improving the operability and features included with your router. To make it
easy for you to receive the best, most up-to-date features of your router, NETGEAR provides a
variety of methods for updating your product.
• The Smart Wizard installation assistant lets you check for and install updates as part of the
setup activity.
• The router includes an update feature that lets you check for and install updates. You must be
logged in to the router to use this feature (see
Getting to Know Your Wireless Router
N300 Wireless Router with USB WNR2200 User Manual
"Upgrading the Router Firmware" on page
v1.0, May 2011
"Configuring Your
5-1).
1-10