NETGEAR WNR2200 User Manual page 81

To configure LAN IP settings, log in to the router, and under the Advanced heading, select LAN
Setup. The following screen displays:
Figure 6-1
If you make changes you must click Apply in order for the changes to take effect.
Note: If you change the LAN IP address of the router while connected through the
browser, you will be disconnected. You must then open a new connection to the
new IP address and log in again.
The LAN Setup fields are explained in the following table.
Table 6-1. LAN Setup
Settings
Device Name
Customizing Your Network Settings
N300 Wireless Router with USB WNR2200 User Manual
Description
A descriptive name for the router, which will be shown in the
Network on Windows Vista and the Network Explorer on all
Windows systems. The Device Name field cannot be blank.
v1.0, May 2011
6-2