Ford Mondeo Owner's Handbook Manual page 90

5. Highlight Nav Info and press the right
arrow button.
6. Highlight the desired setting and press
the OK button to confirm the setting.
7. Press the left arrow button to exit the
menu. Hold the left arrow button
pressed to return to the trip computer
display.
Type 3
1. Highlight Settings with the up and
down arrow buttons and press the
right arrow button.
2. Highlight Setup with the up and down
arrow buttons and press the right
arrow button.
3. Highlight Display and press the right
arrow button.
4. Highlight Configure and press the
right arrow button.
5. Highlight Nav Info and press the right
arrow button.
6. Highlight the desired setting and press
the OK button to confirm the setting.
Language
A choice of eleven languages are
available:
English, German, Italian, French, Spanish,
Turkish, Russian, Dutch, Polish, Swedish
and Portuguese.
Type 1 and 2
1. Press the right arrow button on the
steering wheel to enter the main
menu.
2. Highlight Setup with the up and down
arrow buttons and press the right
arrow button.
3. Highlight Display and press the right
arrow button.
Information displays
88
4. Highlight Language and press the
right arrow button.
5. Highlight the desired setting and press
the OK button to confirm the setting.
6. Press the left arrow button to exit the
menu. Hold the left arrow button
pressed to return to the trip computer
display.
Type 3
1. Highlight Settings with the up and
down arrow buttons and press the
right arrow button.
2. Highlight Setup with the up and down
arrow buttons and press the right
arrow button.
3. Highlight Display and press the right
arrow button.
4. Highlight Language and press the
right arrow button.
5. Highlight the desired setting and press
the OK button to confirm the setting.
Units of measure
Note: The outside air temperature is only
displayed in degrees Celsius and cannot
be set to degrees Fahrenheit.
To select metric or imperial units:
Type 1 and 2
1. Press the right arrow button on the
steering wheel to enter the main
menu.
2. Highlight Setup with the up and down
arrow buttons and press the right
arrow button.
3. Highlight Display and press the right
arrow button.
4. Highlight Measure Unit and press
the right arrow button.
5. Highlight the desired setting and press
the OK button to confirm the setting.