Ford Mondeo Owner's Handbook Manual page 149

Adaptive cruise control (ACC)
E
D
E82310
A ACC on/off
B ACC cancel
C Forward alert on/off
D ACC gap increase
E ACC gap decrease
Switching ACC on
Press switch A. The system is set to
standby mode and Standby is displayed
in the information display.
Setting a speed
E70615
Note: The system must be in Standby
mode.
Press the SET+ switch or the SET-
A
switch to select your desired cruise
speed. The speed is displayed in the
information display and stored as the set
speed. The ACC indicator illuminates.
B
Note: Vehicle speed may be increased
and decreased at intervals of 5 km/h or
5 mph. Smaller increases of 1 km/h or 1
mph may be set by pressing the RES
switch.
C
Changing the set speed
Press the SET+ switch or the SET-
switch to accelerate or decelerate.
Note: If the system does not react to
these changes the reason may be that
the gap interval to the vehicle in front
prevents an increase in speed.
Setting the vehicle gap
E82311
The distance between you and the vehicle
detected in front is maintained by a
variable setting. There are five steps which
are represented by horizontal bars
displayed in the information display. One
bar denotes the smallest gap and five
bars indicate the largest gap. These bars
are shown empty when in standby mode
and filled when in active mode.
147