Starting The Engine - Ford Mondeo Owner's Handbook Manual

Ford mondeo
Hide thumbs Also See for Mondeo:
Table of Contents

Advertisement

Starting with automatic
transmission
Note: Releasing the brake pedal during
engine start will stop the engine cranking
and return to ignition on.
1. Make sure the transmission is in P or
N.
2. Fully depress the brake pedal.
3. Press the start button.
Starting with manual
transmission
Note: Releasing the clutch pedal during
engine start will stop the engine cranking
and return to ignition on.
1. Fully depress the clutch pedal.
2. Press the start button.
Starting a diesel engine
Note: Engine cranking may not
commence until the engine glow plug
cycle has been completed. This may take
several seconds in extremely cold
conditions.
Note: Continue to press the clutch or
brake pedal until engine cranking begins.
Failure to start
The passive starting system will not
function if:
The passive key frequencies are
jammed.
The passive key battery is flat.
If you are unable to start your vehicle carry
out the following procedure.

Starting the engine

122
Type 1
E87382
1. Hold the key next to the steering
column shroud exactly as shown.
2. With the key in this position you can
use the start button to switch the
ignition on and start your vehicle.
Type 2
E87381
1. Carefully prise out the cover.

Advertisement

Table of Contents
loading

Table of Contents