Ford Mondeo Owner's Handbook Manual page 202

Ford mondeo
Hide thumbs Also See for Mondeo:
Table of Contents

Advertisement

1. Position the vehicles so that they do
not touch one another.
2. Switch off the engine and any
electrical equipment.
3. Connect the positive (+) terminal of
vehicle B with the positive (+) terminal
of vehicle A (cable C).
4. Connect the negative (-) terminal of
vehicle B to the ground connection
on the left-hand side suspension turret
of vehicle A (cable D).
CAUTIONS
Do not connect to the negative
(–) terminal of the flat battery.
Make sure that the jump leads are
clear of any moving parts.
To start the engine
1. Run the engine of vehicle B at
moderately high speed.
2. Start the engine of vehicle A.
3. Run both vehicles for a minimum of
three minutes before disconnecting
the cables.
CAUTION
Do not switch on the headlamps
when disconnecting the cables. The
peak voltage could blow the bulbs.
Disconnect the cables in the reverse
order.
Vehicle battery
200

Advertisement

Table of Contents
loading

Table of Contents