Changing Your System Setup; Unify ® System Overview; Using The Unify Menu; Unify System Functions - Bose VideoWave III Operating Manual

UNIFY system overview
®
The intelligent integration system guides you through the initial
process of setting up and configuring your system. It helps you
to choose the right cables and inputs, and to program the click
pad remote to operate your connected devices.
After completing the initial setup, you can use the Unify system
at any time to change your system setup and configuration.

Using the UNIFY menu

To access the UNIFY system:
1. Press the Setup button (page 22) on the front of the
control console to display the UNIFY menu.
2. Use the navigation buttons on the remote control to
highlight the function you want.
3. Press OK on the remote control to activate the function.
4.
When you are done, select "Exit UNIFY" at the bottom of the
menu.
Note: To exit the UNIFY menu at any time or cancel the function
you started to use, press the Source
mote control, or the Setup button on the control console.

UNIFY system functions

Resume initial setup

This function is available only if the initial setup process is not
completed. Selecting this function returns you to initial setup
process at the last completed event.

Restart initial setup

This function is available only if the initial setup process is not
completed. Selecting this starts the initial setup process from
the beginning.

Language

This function allows you to change the language of the on-
screen information.

ADAPTiQ

Selecting ADAPTiQ runs the audio calibration process that
adjusts the system audio output for the best performance in
button on the re-
your room.
Play Bose
Plays the Bose audio/video demonstration. After completion you
are returned to the Unify menu.

Changing Your System Setup

®
demonstration
®
English - 27