Channel Number; Video Settings - Bose VideoWave III Operating Manual

Channel number

Turns off the channel number queue, or specifies the maximum
number of digits used for the source you have selected. The size
of the queue should be set to hold the largest number used by
the source.
2 digits ...............................Number sent after 2 digits entered
(00 to 99)
3 digits (factory setting) .....Number sent after 3 digits entered
(000 to 999)
4 digits ...............................Number sent after 4 digits entered
(0000 to 9999)
Off ......................................Each digit sent immediately when
selected
Control frame sounds
Provides audible feedback when you glide your thumb along the
click pad or select a highlighted function.
On (factory setting) ........ Sound accompanies the movement of
your thumb on the click pad
Off .................................. No click pad sounds

Video settings

Provides video presets for dark, normal, and bright ambient light
conditions.
Dark Room ........................Optimized for very dark lighting
conditions
Normal (factory setting) .....Optimized for most lighting conditions
Bright .................................Optimized for very bright lighting
conditions
Changing Source and System Options
Basic video adjustments
The dark, normal, and bright room video presets have been
optimized at the factory.
Range Dark
Brightness 0 to 100
Contrast 0 to 100
Color 0 to 100
Tint 0 to 100
Video sharpness 1 to 3
Monitor backlight 0 to 10
Color temperature 1 to 3
To adjust a setting:
1. Highlight Video Settings on the OPTIONS menu.
2. Press and hold the OK button on the remote control to
access the basic video adjustments for the preset.
3. Press the Up/Down navigation buttons on the remote
control to select the value you wish to change.
4. Press the Left/Right buttons to adjust the value.
5. Press OK to return to the OPTIONS menu.
Factory setting
Normal Bright
23 23 23
64 64 64
60 62 62
50 50 50
2 2 2
3 5 8
3 3 3
English - 25