Selecting From Intersection - Eclipse AVN726EA Owner's Manual

6
Touch [<Street Name>].
● Start entering the street name on the
keyboard.
● After entering a couple of characters, the
names that match the string appear in a
list.
● Touch [Done] to open a list of results
before one appears automatically.
Instead of selecting one of the streets,
7
touch [Search in All].
8
Touch [<House Number>].
● Enter the house number on the keyboard.
Touch [Done] to finish entering the
9
address.
A list appears with the matching
10
addresses. Touch the desired one.
The map appears with the selected
11
point in the middle. From the Cursor
menu, touch [Set as Destination]
(Advanced mode). The route is then
automatically calculated, and you can
start navigating.
93

■ Selecting from intersection

Touch the following switches: [Find],
1
[Find Address] (Advanced mode).
By default, Navigation proposes the
2
country/state and city where you are. If
needed, touch the switch with the
name of the country/state, and select a
different one from the list.
3
If needed, change the city.
● To select the city from the list of recently
used ones, touch the
Touch the following switches. After
4
changing the country/state, touch
[<Enter Suburb/Town Name>].
● Start entering the city name on the
keyboard.
● After entering a couple of characters, the
names that match the string appear in a
list.
● Touch [Done] to open a list of results
before one appears automatically.
5
Pick the city from the list.
switch.
93