Eclipse AVN7000 User Manual
  1. Manuals
  2. Brands
  3. Eclipse Manuals
  4. Car Navigation system
  5. AVN7000
  6. User manual

Eclipse AVN7000 User Manual

Eclipse avn7000: user guide
Hide thumbs Also See for AVN7000:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Manual
Warnings and caution signs, illustrated below, are posted throughout this manual as well as on
the device itself. They show safe and correct ways to handle the product so as to prevent
personal injury to you and others, and to avoid damage to property. Before reading through
the manual, take time to read through and learn the important information listed in this section.
* The images appearing on the screen may differ from those shown in this manual
depending on the type of database used and when it was created.
Warning
Caution
The symbol shown below indicates important instructions or helpful information to keep in
mind.
A point it will be helpful to remember.
Important points.
● Please read all materials that come with the product, such as manuals and warranties.
Eclipse will not be liable for unsatisfactory product performance due to failure to follow these
instructions.
● Changes in product specifications may result in differences between the content of the
manual and actual product features.

Warnings and Cautions

This symbol indicates a situation in which incorrect handling
through disregard of a warning might result in death or serious
personal injury.
This symbol indicates a situation in which incorrect handling
through disregard of a caution might result in personal injury or
may result solely in damage to property.
1

Advertisement

Table of Contents
loading

Related Manuals for Eclipse AVN7000

Summary of Contents for Eclipse AVN7000

  • Page 1: Warnings And Cautions

    Important points. ● Please read all materials that come with the product, such as manuals and warranties. Eclipse will not be liable for unsatisfactory product performance due to failure to follow these instructions. ● Changes in product specifications may result in differences between the content of the manual and actual product features.

  • Page 2: Table Of Contents

    Introduction How to use this manual ......12 Features ......... 14 Before using the deck .
  • Page 3 Adjusting POS (Positioning selector) ..... . . 38 Setting the balance ........39 Setting LOUDNESS .
  • Page 4 How to operate the tuner How to use the AM/FM radio ......63 Listening to the AM/FM radio ......63 Selecting radio stations.
  • Page 5 Listening to SIRIUS satellite radio when the display is retracted ..... 73 Displaying the SIRIUS ID ........74 Changing the SIRIUS band .
  • Page 6 Displaying the current level ....... 85 Repeating the same music file ......86 Playing music files in random order .
  • Page 7 How to operate the CD Changer How to use the CD changer ......98 Listening to a CD ........98 Listening to a CD when the display is raised .
  • Page 8 Pausing the video ....... . . 109 Stopping the video....... . . 109 Operating the disc menu .
  • Page 9 How to operate the tuner when an optional TV tuner has been connected How to use the TV ....... . 128 Watching a TV .
  • Page 10 Setting LOUDNESS ........148 Setting the harmonizer .

  • Page 11: For Reference

    For reference Important Points ....... . . 171 If one of these messages appears ......171 Before asking for repairs.

  • Page 12: How To Use This Manual

    Introduction 1. How to use this manual Item title A number and title is assigned to each item. Operation title A title is assigned to each operation. Operation procedure Describes the operation. Proceed with the operation steps in numerical order. Attention Additional points regarding operation...
  • Page 13 Detailed operation title A title is assigned to each detailed operation. Section side heading The side heading for the current section. Operation screen A screen showing the operation. Continue to the next page Indicates that operation procedures continue on the next page.

  • Page 14: Features

    Introduction 2. Features DVD player with sharp video and dynamic sound (Page 102) Plays DVD videos recorded with high image and sound quality. (DVD media is able to record a movie with high quality video and digital sound that exceeds the quality of CD media.) MP3/WMA player that plays back the equivalent of several albums of music recorded on a single music disc (Page 82)
  • Page 15 Selection and display of preferred wallpaper (screen backgrounds) (Page 46) Wallpaper of your choice can be selected and displayed for use as the background of the information screen and audio operation screens. A screen from the navigation unit can also be linked to and selected.
  • Page 16 Introduction Features ● SIRIUS satellite radio tuner unit (Page 72) Satellite radio broadcasting can be received if an optional SIRIUS satellite radio tuner unit is connected. ● VTR (Page 126) Videos can be watched if a VTR deck is connected. ●...

  • Page 17: Before Using The Deck

    Introduction 3. Before using the deck ●Be very careful and pay close attention to safety when operating the audio controls while driving, otherwise accidents may occur. Also be sure to set the volume so that you can still adequately hear sounds outside the vehicle.
  • Page 18 Introduction Before using the deck ●Do not apply excessive force to the monitor, or damage may occur. ●Do not insert any objects other than discs or Memory Sticks into the slot. Otherwise damage may occur. ●Be careful not to get fingers or other objects caught in the monitor when it is being retracted into place.

  • Page 19: About Discs

    About discs ●Water droplets (condensation) can form on the inside of the unit during cold or rainy weather in the same way car windows can fog up. When this happens, the audio can jump and playback can stop, so ventilate or dehumidify the vehicle for a short time before operating the equipment.

  • Page 20: About Handling Discs

    Introduction Before using the deck ●Super Audio CDs can only be played in the hybrid disc layer. ●CCCDs (Copy Control CD) do not conform to official CD standards and so are not supported. ●CD-EXTRA discs can be played as audio CDs. ●Voice tracks on Mixed Mode CDs cannot be played.

  • Page 21: About New Discs

    ●You may notice that some brand new discs are rough Rough Edges around the center hole or outside edge. Remove the Ballpoint pen rough edges with the side of a ballpoint pen, etc. before using. Rough edges may prevent proper loading in the unit.

  • Page 22: About Supported Memory Stick Duo Types

    ●MG Memory Stick Duos labeled with the following marks can be used with this device. ●MG Memory Stick Duos labeled with the following marks can only be used when registering a pass code in database update or Eclipse Security Network (ESN). MagicGate Memory Stick Corporation.

  • Page 23: About Handling The Memory Stick Duo

    About handling the Memory Stick Duo ●In order to maintain a high quality sound, regularly wipe clean any dust or dirt from the surface of the Memory Stick Duo with a dry cloth. ●Always place in the case provided when transporting or storing.

  • Page 24: About Tv

    Introduction Before using the deck About TV ●When connection with the battery is cut due to changing it, changing fuses, etc., all preset channels will be erased. ●It may be difficult for the TV to maintain optimal reception due to variation in signal strength or interference from other objects.

  • Page 26: Basic Operation

    Basic operation 1. Switching modes The unit can be used when the vehicle's ignition switch is in the ON or ACC position. Switching the mode Switching the source when the display is retracted Press Turn to select the audio source. ●...

  • Page 27: Switching The Source When The Display Is Raised

    Switching the source when the display is raised Press ● The SOURCE MENU screen is displayed. Touch the touch switch for an audio source and relevant mode will be displayed on the screen. ● When the optional 5.1 ch decoder/AV matrix unit is connected, touch NEXT to display...

  • Page 28: Displaying Operation Screen

    Basic operation Switching modes Press AUDIO Touch the SOURCE MENU RECALL switch (indicated at left) in the audio or DVD/VTR operation screen. When the SOURCE MENU switch is touched, the operation screen for the selected source is displayed. ● Touch to return to the original screen.

  • Page 29: Operation Screen Of Each Mode

    Basic operation 2. Operation screen of each mode The operation screen for each mode will appear as shown below. ● AM radio operation screen ● CD player operation screen ● Memory Stick player operation screen ● CD changer operation screen (optional) ●...
  • Page 30 Basic operation Operation screen of each mode ● VTR operation screen ● AUX operation screen (optional) When the operation screen for the DVD or VTR has not been operated for 6 seconds or more, it will automatically be canceled. ● SIRIUS satellite radio operation screen (optional)

  • Page 31: Adjusting The Volume

    Basic operation 3. Adjusting the volume Adjusting the main volume Turn the button. ● Adjustment levels from 0 to 80 are available. Turn to the right :Volume UP (louder) Turn to the left : Volume DOWN (quieter) Setting the BEEP tone The guide tone that is emitted when touching a panel switch or touch switch can be set.

  • Page 32: Adjusting Sound Quality

    Basic operation 4. Adjusting sound quality By adjusting the equalizer and the volume balance you can simulate a favored sound environment within the vehicle. Sound quality can be adjusted in all audio operation screens. Displaying the sound adjustment screen Touch SOUND ●...
  • Page 33 ● The sound adjustment screen can be changed to the following adjustment screens. ● Sound adjustment screen ● Parametric equalizer adjustment screen ● Position setting screen ● Time alignment adjustment screen SETTING...
  • Page 34 Basic operation Adjusting sound quality The following settings/adjustments can be made in operation screens and setting screens. Touch switch/item FADER BALANCE LOUDNESS HARMONIZER WOOFER Function The median frequency, frequency level, and Q curve pattern can be adjusted using the 7-band parametric equalizer.

  • Page 35: Adjusting Eq (Equalizer)

    Adjusting EQ (equalizer) Adjusts sound quality to preferred characteristics according to the music genre and audio source. The sound quality can be adjusted according to music genre and then stored.This product has a 7-band parametric equalizer which can adjust median frequency, frequency level, and Q curve (bandwidth).
  • Page 36 Basic operation Adjusting sound quality Touch select a Q curve. ● The Q curve patterns set the median frequency bandwidth as follows: Switch Mild (bandwidth: wide) Mid (bandwidth: medium) Sharp (bandwidth: narrow) Repeat steps change the setting for each band. ●...

  • Page 37: Selecting A Eq Pattern From Memory

    Selecting a EQ pattern from memory Touch a switch from ● The preset pattern stored in memory will be retrieved. BACK ● Touch after making settings. The PEQ mode adjustments will be saved and the system will return to the previous operation screen. The currently saved equalizer can be returned to the default values.

  • Page 38: Adjusting Pos (Positioning Selector)

    Basic operation Adjusting sound quality Adjusting POS (Positioning selector) Sound localization can be adjusted according to the number and position of passengers in order to obtain optimum acoustic effects. A seat's sound localization can be adjusted simply by touching a switch. Touch one of the seat images displayed in the POSITION setting screen to switch the sound...

  • Page 39: Setting The Balance

    Setting the balance The left/right/front/rear balance can be adjusted so that sound from all speakers arrives at the listener's ears at the same time. FADER BALANCE Touch POSITION setting screen to display the volume balance adjustment screen. Touch the screen at the preferred balance point.

  • Page 40: Setting Loudness

    Basic operation Adjusting sound quality Setting LOUDNESS Audio can be modulated to correct for insufficient bass and treble when listening at low volume. Touch , or LOUDNESS. ● The selected touch switch will turn light blue. Touch BACK Setting time alignment This function corrects position characteristics and frequency characteristics in order to delay the signals being output from the various speakers, causing the signals from each speaker reach the listening position at the same time.

  • Page 41: Selecting The Type Of Vehicle (Car Type)

    Selecting the type of vehicle (CAR TYPE) You can select the time alignment settings to match your vehicle from a range of preset settings for different types of vehicle, allowing you to select the optimum time alignment settings automatically. Touch COMPACT WAGON MINI VAN...

  • Page 42: Selecting Rear Speaker Position (Rear Speaker)

    Basic operation Adjusting sound quality Selecting rear speaker position (REAR SPEAKER) You can select the rear speaker installation location, allowing you to select the optimum time alignment settings automatically. Touch DOOR REAR SPEAKER. BACK ● Touch settings. The time alignment setting will be saved and the system will return to the previous screen.

  • Page 43: Selecting Phase Control

    The merging of sound between the front and rear speakers and the sub-woofer can be improved by selecting the phase. Switch to a phase which lets the speakers combine without any disharmony. Touch NORMAL PHASE CONTROL. BACK ● Touch after making settings.

  • Page 44: Setting Woofer Output

    Basic operation Adjusting sound quality The sub-woofer output can be set to STEREO or MONO. Select the method that matches the output method for the connected sub-woofer system. Touch STEREO WOOFER OUTPUT. BACK ● Touch settings. The woofer output setting will be saved and the system will return to the previous screen.

  • Page 45: Setting The Harmonizer

    Setting the harmonizer It is possible to set the sound quality boost level to automatically regenerate harmonics such as reverberation, depth, and tone lost in compression, producing a much clearer sound. Touch HARMONIZER. ● : Low level of correction : High level of correction : No correction Touch BACK...

  • Page 46: Setting The Background Screen

    Basic operation 5. Setting the background screen The background for the audio operation screen, information screen and navigation screen can be changed to a preferred wallpaper. Setting the Pic-CLIP Press NAVI MENU Touch in the MENU INFO. screen. Touch SETTING Touch CHANGE Touch...

  • Page 47: Uploading The Image Data From Another Source

    Uploading the image data from another source Image data (still pictures) recorded in the HDD of the device, or on a CD-R/RW or "MG Memory Stick Duo", can be displayed as a Pic-CLIP. Press NAVI MENU Touch INFO. in the MENU screen.
  • Page 48 Basic operation Setting the background screen MEMORY STICK Touch to select the location of the image data. Touch the image data to be set for Pic-CLIP. ENTER Touch PREVIEW ● Touch selected image. Touch BACK CUSTOM Touch ● The set Pic-CLIP will be displayed. ENTER Touch ●If any data other than image data are located on the same disc, image data...

  • Page 49: Image Data Storage

    Wallpaper image data must be stored in one of the following ways: ● Image data written to a "Memory Stick Duo" from a digital camera ● Image data written to a CD-R/RW from a PC or similar device ● Image data written to a "Memory Stick Duo" from a PC or similar device The following restrictions apply when storing image data.
  • Page 50 Basic operation Setting the background screen Contents of list display (in order of display) Image files to be recorded *1 If a "Memory Stick Duo" contains image data from both a digital camera and a PC, a total of up to 100 files can be displayed. *2 Numbers, letters (capitals), and "_"...

  • Page 51: Saving Image Data

    Up to 100 files of image data recorded on a CD-R/RW, "MG Memory Stick Duo" or "Memory Stick Duo" can be uploaded to the HDD (hard disc) of the device. Press NAVI MENU Touch INFO. in the MENU screen. DATA Touch SAVE (HDD) Touch...
  • Page 52 Basic operation Setting the background screen MEMORY STICK Touch select the location of the image file. Touch the image file to be saved. SAVE Touch ALL SAVE ● Touch image files recorded on the "Memory Stick Duo" or CD. PREVIEW ●...
  • Page 53 ●The following screen will appear if the same file name already exists. OVERWRITE ●Touch to overwrite the old data with the new data. AUTO-ASSIGN ●Touch to save the file with a specified number prefixed to the file name. [Example] If "AA1.jpg" already exists, the new file with the same file name auto- matically renamed "001_AA1.jpg"...

  • Page 54: Deleting Image Data

    Basic operation Setting the background screen Deletes image data from the HDD (hard disc) of the device. Press NAVI MENU Touch INFO. in the MENU screen. DATA Touch DELETE (HDD) Touch CLIP DATA. Touch the image file to be deleted.. DELETE Touch ALL DELETE...

  • Page 55: Setting The Opening Screen

    Setting the opening screen A preferred wallpaper can be set to display as the opening screen. This is the screen that is displayed when power to the device is turned ON. Setting the opening screen Press NAVI MENU Touch INFO. SETTING Touch NEXT...
  • Page 56 Basic operation Setting the background screen Touch ● The selected screen is displayed. ENTER Touch...

  • Page 57: Adjusting/Setting The Screen

    Basic operation 6. Adjusting/setting the screen Switching the FUNCTION switch display Touch switches not frequently used are not displayed in the audio operation screens and DVD screens. These switches can be displayed as follows. Touch FUNC ● The FUNCTION switches appear. ●...

  • Page 58: Displaying The Image Adjustment Screen

    Basic operation Adjusting/setting the screen Quality adjustments can be made for images such as the audio operation screen, navigation screen, DVD, TV (optional) or VTR (optional). Displaying the image adjustment screen Contrast, brightness and other picture settings can be adjusted to match viewing preferences for DVD video or the audio operation screen.

  • Page 59: Setting Daytime Display To Display When Vehicle

    Press briefly (for less than 1 second) on the audio mode operation DISP screen or DVD/TV/VTR screen. Touch ENTER after making any adjustments. ● If no operations are made for about 20 seconds, the display will return to the previous screen.

  • Page 60: Adjusting Image Quality

    Basic operation Adjusting/setting the screen The daytime display and nighttime display can be separately adjusted. ● When adjusting from the audio operation screen or navigation screen CONTRAST Touch to increase contrast, or BRIGHT Touch to increase brightness, or COLOR (for DVD/TV/VTR screen only) Touch to increase green, or TINT (for DVD/TV/VTR screen only)
  • Page 61 Touch NORMAL WIDE1 ● This selects the display mode. NORMAL mode The screen is shown with a vertical to horizontal ratio of 3 to 4. The side edges are black. WIDE 2 mode Only the left and right edges of the screen are stretched out.

  • Page 62: Setting The Control Panel

    Basic operation 7. Setting the control panel Switching the sub display The display contents of the sub display can be switched between the audio source display and the clock display. Press DISP for more than 1 second. ● Each time the button is pressed, the audio source display and clock display are switched.

  • Page 63: How To Use The Am/Fm Radio

    How to operate the tuner 1. How to use the AM/FM radio SOURCE MENU RECALL switch POWER button VOL button Listening to the AM/FM radio Listening to the radio when the display is raised Press or touch the SOURCE MENU RECALL switch. Touch for AM radio, or Listening to the radio when the display is retracted...

  • Page 64: Selecting Radio Stations

    How to operate the tuner How to use the AM/FM radio Selecting radio stations Press ● Pressing the switch once moves the frequency one step up or down. (One step on the AM band is 10kHz. One step on the FM band is 0.2MHz) ●...

  • Page 65: Selecting Radio Bands

    Selecting radio bands Touch FUNC Touch BAND ● Each time the switch is touched, the radio band will be changed in the order shown below.

  • Page 66: Saving Radio Stations

    How to operate the tuner How to use the AM/FM radio Saving radio stations There are two modes for saving radio stations, manual and AUTO. P. These modes operate independently. Make sure "AUTO. P" is not displayed in the upper part of the screen. ●...

  • Page 67: Turning Off The Radio

    About AUTO.P Because the AUTO. P function can be used to temporarily save stations for the preset switches, stations saved manually will remain in memory even if AUTO. P is used. Manually saving stations that are used regularly allows them to be restored even after AUTO.

  • Page 68: How To Use Hd Radio

    How to operate the tuner 2. How to use HD Radio SOURCE MENU RECALL switch POWER button VOL button Listening to HD Radio If an optional HD Radio (High Definition Radio) tuner unit is connected, terrestrial digital broadcasts can be received. When terrestrial digital broadcasts are received, FM reception has the same quality as a CD, and AM reception has the same quality as conventional FM sound.

  • Page 69: Selecting Radio Stations

    Selecting radio stations Press ● Pressing the switch once moves the frequency one step up or down. (One step on the AM band is 10kHz. One step on the FM band is 0.2MHz.) (up switch) : Raises frequency (down switch) : Lowers frequency Press and hold ●...

  • Page 70: Saving Radio Stations

    How to operate the tuner How to use HD Radio Saving radio stations There are two modes for saving radio stations, manual and AUTO.P. These modes operate independently. Make sure "AUTO. P" is not displayed in the upper part of the screen. Use manual tuning or automatic tuning to select the station to be saved.

  • Page 71: Hd Radio Reception Settings

    HD Radio reception settings The HD Radio reception method can be selected. When the HD Radio tuner is connected to this deck for the first time, it will be set at “AUTO” (automatic digital/analog selection). Touch MODE ● In the “AUTO” setting, the selection is switched between digital and analog reception automatically.

  • Page 72: How To Use The Sirius Satellite Radio

    How to operate the tuner 3. How to use the SIRIUS satellite radio About SIRIUS satellite radio If an optional SIRIUS satellite radio tuner unit is connected, satellite radio broadcasts can be received. With SIRIUS satellite radio, over 100 channels are available including music, sports, news, and entertainment programs.

  • Page 73: Listening To Sirius Satellite Radio

    SOURCE MENU RECALL switch POWER button VOL button Listening to SIRIUS satellite radio Listening to SIRIUS satellite radio when the display is raised Press or touch the SOURCE MENU RECALL switch when a portable audio player is connected. Touch SIRIUS Listening to SIRIUS satellite radio when the display is retracted Press Turn...

  • Page 74: Displaying The Sirius Id

    How to operate the tuner How to use the SIRIUS satellite radio Displaying the SIRIUS ID Press NAVI MENU Touch INFO. Touch SIRIUS ● SIRIUS ID will appear. Changing the SIRIUS band Touch FUNC Touch BAND BAND ● Each time below.

  • Page 75: Selecting Channels

    Selecting channels Press ● Pressing the switch once selects the next channel. ● : Select a higher channel. : Select a lower channel. Press and hold ● The channel that is closest the current channel will be searched for automatically, and searching will stop when the channel is received.

  • Page 76: Category Selection

    How to operate the tuner How to use the SIRIUS satellite radio Channels can be selected from among categories such as POP and ROCK. Consult the SIRIUS website for category details. Touch FUNC Touch CATEGORY Touch a category switch. NEXT ●...

  • Page 77: Saving Channels

    Saving channels Select the channel to be saved. Choose a preset switch and touch it until you hear a beep. ● The channel is set. Touch the preset switch to select the channel. Displaying information about the current track When receiving an SIRIUS satellite radio broadcast, information about the current track, such as the name of the station, the album, the title of the track, and musical genre, can be displayed.

  • Page 78: How To Operate The Cd Player

    How to operate the CD player 1. How to use the CD player SOURCE MENU RECALL switch POWER button VOL button Listening to a CD Playback starts when a CD is inserted into the disc slot. Listening to a CD when the display is raised Press or touch the SOURCE MENU RECALL switch once a CD has been inserted.

  • Page 79: Listening To A Cd When The Display Is Retracted

    Listening to a CD when the display is retracted Press Turn to select CD. Press ●Titles and track names can be displayed when they are recorded on the CD. Up to 28 characters can be shown in the display. ●Only characters recorded in ASCII code can be shown on the CD-TEXT display. ●The CD-TEXT display may not be able to show text information for discs with too many title characters recorded.

  • Page 80: Selecting A Track

    How to operate the CD player How to use the CD player Selecting a track You can jump to the opening of a track you want to hear. Press ● (up) : Selects next track (down) : Selects previous track Fast-forwarding/rewinding It is possible to fast-forward or rewind the track being played.

  • Page 81: Turning Off The Cd Player

    Turning off the CD player Press ● Press again to resume playback.

  • Page 82: How To Operate The Mp3/Wma Player

    How to operate the MP3/WMA player 1. How to use the MP3/WMA player For safety considerations, some functions are disabled while the vehicle is in motion. SOURCE MENU RECALL switch POWER button VOL button Example of an MP3/WMA file structure Explanations are based on this example of an MP3/WMA file structure.

  • Page 83: Playing Mp3/Wma Files

    Playing MP3/WMA files Playback starts automatically when a CD is inserted into the disc slot. Playing MP3/WMA files when the display is raised Press or touch the SOURCE MENU RECALL switch once a disc has been inserted. Touch MP3 WMA ●...

  • Page 84: Selecting With The Tune/Track Buttons

    How to operate the MP3/WMA player How to use the MP3/WMA player Selecting with the TUNE/TRACK buttons When several music files are located in the same folder, the next music file or previous music file can be selected with the track selection (track start point) buttons. Press ●...

  • Page 85: Fast-Forwarding/Rewinding

    Fast-forwarding/rewinding It is possible to fast-forward or rewind within the current file. Press and hold ● (up): Fast-forward (down): Rewind If you hear a beep while rewinding (fast-forwarding), the deck has switched to the fast- forward (rewind) mode and will continue until you remove your finger from the button. Changing display of the current level The folder level can be switched and displayed.

  • Page 86: Repeating The Same Music File

    How to operate the MP3/WMA player How to use the MP3/WMA player Repeating the same music file Touch FUNC Touch ● Repeats the current file. ● The file will repeat until the function is canceled. Touch Playing music files in random order Touch FUNC Touch...

  • Page 87: About The File Information Display

    About the file information display Folder names and file information (album name and track titles) recorded on the disc can be displayed. The number of characters that can be displayed is shown below. Folder/file names 12 characters max.* *: Varies according to the type of characters used Displaying folder/file names Press AUDIO...

  • Page 88: About Mp3/Wma Files

    How to operate the MP3/WMA player How to use the MP3/WMA player About MP3/WMA files MP3 (MPEG-1 Audio Layer III) is a standard format for audio compression technology. By using the MP3 format, a file can be compressed to one-tenth its original size. WMA (Windows Media compress files to a smaller size than MP3 can.

  • Page 89: Playable Wma File Standards

    Playable WMA file standards ● Supported standards: ● Supported sampling frequencies:44.1, 48 (kHz) ● Supported bitrates: Playable sampling frequencies and supported bitrates 160 k 128 k 96 k 80 k bitrates (bps) 64 k 48 k : Playable : Not playable - : No combination WMA Ver.

  • Page 90: Id3 Tag/ Wma Tag

    How to operate the MP3/WMA player How to use the MP3/WMA player ID3 tag/ WMA tag MP3 and WMA files have an ID3 tag/WMA tag that allows the input of text information so that data such as track titles and artists can be saved. ■...

  • Page 91: Supported Disc Formats

    The disc formats supported by this device are shown below. ● Disc formats: CD-ROM MODE1, CD-ROM XA MODE2 (Form1) ● File formats ■ ISO9660 Folder name (max. number of characters) File name (max. number of characters) Characters displayed ■ Extended format Folder name (max.

  • Page 92: File Names

    How to operate the MP3/WMA player How to use the MP3/WMA player Only files with the MP3/WMA file extension".MP3/.WMA" will be recognized as MP3/WMA and played in the unit. Be sure to save MP3/WMA files with an ".MP3/.WMA" file extension. Use capital letters when attaching file extensions.

  • Page 93: Making And Playing Mp3/Wma Files

    Making and playing MP3/WMA files MP3/WMA files created by recording broadcasts, records, audio recordings, video recordings or live performances cannot be used for purposes other than personal entertainment without permission of the copyright holder as set forth in copyright law. Downloading from Internet MP3/WMA music sites There are many kinds of sites that distribute MP3/WMA files on the Internet, such as "pay per download"...

  • Page 94: How To Operate The Memory Stick Player

    How to operate the Memory Stick player 1. How to use the Memory Stick player The unit can play music data recorded on a Memory Stick Duo using ATRAC3 (audio compression technology). SOURCE MENU RECALL switch POWER button VOL button Listening to Memory Stick data Insert a Memory Stick Duo into the slot and attach the control panel.

  • Page 95: When The Display Is Retracted

    Listening to Memory Stick data when the display is retracted Press Turn to select MS. Press ●This unit can only play music data recorded on MG Memory Stick Duos (white or dark blue). ●This unit cannot play music data recorded using ATRAC3 Plus. ●The unit cannot be operated for about 4 seconds after an MG Memory Stick Duo has been inserted while the system is checking the data.

  • Page 96: Selecting A Track

    How to operate the Memory Stick player How to use the Memory Stick player Selecting a track You can jump to the opening of a track you want to hear. Press ● (up) : Selects next track (down) : Selects previous track Fast-forwarding/rewinding It is possible to fast-forward/rewind within the current track.

  • Page 97: Playing Tracks In Random Order

    Playing tracks in random order Touch FUNC Touch RAND ● Plays tracks in random order. ● Random playback will continue until the function is canceled. Touch cancel. ● At the end of each track the system arbitrarily chooses which track to play next. As a result, it is possible for the same track to be played multiple times in a row.

  • Page 98: How To Operate The Cd Changer

    How to operate the CD Changer 1. How to use the CD changer An optional CD changer can be connected and used. SOURCE MENU RECALL switch POWER button VOL button Listening to a CD Listening to a CD when the display is raised Press or touch the SOURCE MENU RECALL switch.

  • Page 99: Selecting A Track

    Selecting a track See "How to use the CD player" on page 80. Fast-forwarding/rewinding See "How to use the CD player" on page 80. Selecting a CD A CD can be selected from among all the discs in the changer. Touch one of the disc change switches.

  • Page 100: Playing Tracks In Random Order

    How to operate the CD Changer How to use the CD changer Playing tracks in random order Playing tracks on the current CD in random order See "How to use the CD player" on page 80. Playing tracks on all CDs in random order Touch FUNC Touch...

  • Page 101: Turning Off The Cd Changer

    Turning off the CD changer Press ● Press again to resume playback.

  • Page 102: How To Operate The Dvd Player

    How to operate the DVD player 1. Before using the DVD player This unit can output the high quality images and high quality digital sound of DVD videos. It is also possible to switch between different languages recorded on the DVD video (dubbing, subtitles, etc.), and with videos having several angles of the same scene recorded, the preferred angle can be selected and played.

  • Page 103: About Subtitles

    Some DVD discs have subtitles recorded in several different languages, and the subtitles can be switched during playback. The video can also be played without any subtitles displayed. About discs This unit conforms to NTSC color television methods, so please use discs that display "NTSC" on the disc or package.

  • Page 104: About Region Codes

    How to operate the DVD player Before using the DVD player Some DVD discs display a region where the disc can be played. This unit can only play discs with region codes "1" or "ALL". If you play discs with any region code other than those shown above, a "This disc cannot be played"...

  • Page 105: About Dvd Disc Structures

    About DVD disc structures Videos and tracks recorded on a DVD are divided into many segments. Large segments are called "titles", and each title has a number ("title number"). Title segments are further divided into smaller segments called "chapters", and each chapter has a number ("chapter number").

  • Page 106: Operation Flow

    How to operate the DVD player Before using the DVD player Operation flow The section below describes the flow for functions such as operation and search of images and setting defaults for the DVD player. Played automatically To search the video ●...

  • Page 107: How To Use The Dvd Player

    How to operate the DVD player 2. How to use the DVD player For safety reasons, DVDs can only be played when the ignition is switched to ON or ACC and the vehicle is completely stopped with the parking brake applied. (Only sound is output if a DVD is played while the car is in motion.) SOURCE MENU RECALL switch...

  • Page 108: Operating The Video

    How to operate the DVD player How to use the DVD player Operating the video Touch It is possible to fast-forward or rewind through the video being played. Fast-forwarding/rewinding using the panel buttons Press and hold ● (up) : Fast-forward (down) : Rewind If you hear a beep while rewinding (fast-forwarding), the deck has switched to the fast- forward (rewind) mode and will continue until you remove your finger from the button.

  • Page 109: Pausing The Video

    Pausing the video Touch ● While paused ( ), briefly touch for slow motion playback. Stopping the video Touch...

  • Page 110: Operating The Disc Menu

    How to operate the DVD player How to use the DVD player Operating the disc menu It is possible to use the menu recorded on the disc. Touch in the DVD operation NEXT screen. Touch MENU Touch Touch select the video you want to play. Touch ENTER Turning off the DVD...

  • Page 111: Searching For A Desired Chapter

    Searching for a desired chapter It is possible to search for a particular video segment by title and chapter or by menu number (number for divided segments). Press ● (up) : Selects next chapter (down) : Selects previous chapter Searching by title number Touch SEARCH in the DVD...

  • Page 112: Searching By Menu Number

    How to operate the DVD player How to use the DVD player Touch in the DVD operation NEXT screen. Touch Touch NUMBER ● The menu number input screen will be displayed. Enter the menu number by touching ● Touch menu number in steps of one. ●...

  • Page 113: Changing The Touch Switch Display

    Changing the touch switch display Display of the touch switches can be changed or turned off. Turning off the touch switches Touch in the DVD operation screen. AUDIO ● Press or touch the screen to display the touch switches again. Changing the touch switch display locations Touch in the DVD operation...

  • Page 114: Switching Screen Display/Audio

    How to operate the DVD player How to use the DVD player Switching screen display/audio It is possible to change the language for subtitles and audio, as well as the display angle for the video being played. When several angles of a scene are recorded on a disc, the angle can be switched. Touch in the DVD operation NEXT...

  • Page 115: Switching Subtitle Language

    Switching subtitle language When subtitles in several languages are recorded on a disc, the subtitles can be switched. Touch in the DVD operation NEXT screen. Touch SUB TITLE ● The subtitle number will be displayed. Touch SUB TITLE ● The subtitle number will switch and the subtitle language will change.

  • Page 116: Switching Dubbed Audio Language

    How to operate the DVD player How to use the DVD player Switching dubbed audio language If several audio languages are recorded on a disc, the languages can be switched. Touch in the DVD operation NEXT screen. Touch AUDIO ● The audio number and language will be displayed.

  • Page 117: Setting The Dvd Player

    Setting the DVD player The language preferences for voices, subtitles and menu display used during DVD playback can be set in advance. Optional display of the multiple angle mark, viewer restriction and other functions can also be set. Touch in the DVD operation NEXT screen.

  • Page 118: Setting The Audio Language

    How to operate the DVD player How to use the DVD player Touch switch AUDIO LANGUAGE SUB TITLE MENU LANGUAGE ANGLE INDICATOR PARENTAL SETTING VIDEO OUT The preferred language for video playback can be selected. Touch AUDIO LANGUAGE SETUP screen. Touch the preferred language.

  • Page 119: Subtitle Language Settings

    Subtitle language settings The preferred subtitles for the video playback can be selected. Touch in the SET UP SUB TITLE screen. Touch the preferred language. OTHER ● Touch to set a language other than those displayed on the screen. Touch in the SUB TITLE OTHER setting screen.

  • Page 120: Menu Language Settings

    How to operate the DVD player How to use the DVD player Allows selection of a preferred menu language from those recorded on the disc. Touch MENU LANGUAGE in the SETUP screen. Touch the preferred language. OTHER ● Touch other than those displayed on the screen.

  • Page 121: Setting The Display Of The Multi-Angle Mark

    Setting the display of the multi-angle mark (angle selection mark) The multi-angle mark can be set to display or not display during video playback. Touch ANGLE INDICATOR in the SETUP screen. ● Touching the switch switches between "ON" and "OFF" mode. Touch ENTER Setting the multi-angle mark display to "ON"...

  • Page 122: Viewer Restriction Settings

    How to operate the DVD player How to use the DVD player This function allows a viewing restriction to be set so that discs with adult content or violence will not be available to children. The viewer restriction can be set at different levels to match restriction ratings.

  • Page 123: Changing Video Output

    Changing video output Touch in the SETUP VIDEO OUT screen. ● Each time the switch is touched, the screen size changes in the order shown below. 4 : 3 16 : 9 LETTER BOX PAN & SCAN ● 16 : 9 The video is displayed at normal width.

  • Page 124: Setting Dvd Individual Monitor Playback

    How to operate the DVD player How to use the DVD player Setting DVD individual monitor playback When an optional rear monitor is connected, the screen of the device can be switched to AUDIO SOURCE or the navigation system screen while the rear monitor continues to play the DVD.

  • Page 125: Table Of Language Codes

    Table of language codes These codes are used to specify the language for audio tracks, subtitles and on-screen menu displays. Input Language code 1001 Japanese 0514 English 0618 French 0405 German 0920 Italian 0519 Spanish 1412 Dutch 1821 Russian 2608 Chinese 1115 Korean...

  • Page 126: How To Operate The Vtr

    How to operate the VTR 1. How to use the VTR Video tapes can be played by connecting a commercially available VTR deck. For safety reasons, videos can be played only when the ignition is switched to ON or ACC and the vehicle is completely stopped with the parking brake set.

  • Page 127: Switching To The Vtr Setting Screen

    Switching to the VTR setting screen Switch to the VTR setting screen in VTR mode to perform the following operations. ● To adjust sound quality (EQ, POS etc.) ● To switch screen modes (wide mode) Touch BACK ● Touch to return to the VTR operation screen. Turning off the VTR mode Press ●...

  • Page 128: How To Use The Tv

    How to operate the tuner when an optional TV tuner has been connected How to use the TV The unit can be used as a TV if a TV tuner (sold separately) is connected to the unit. For safety reasons, the TV can be viewed only when the ignition is switched to ON or ACC and the vehicle is completely stopped with the parking brake set.

  • Page 129: Selecting Channels

    Selecting channels Press ● Pressing the switch once moves the channel one step up or down. (up): Raises the channel (down): Lowers the channel Press and hold ● The channel that is closest to the current channel will be searched for automatically, and searching will stop when the channel is received.

  • Page 130: Saving Channels

    How to operate the tuner when an optional TV tuner has been connected How to use the TV Saving channels There are two modes for saving channels, manual and AUTO.P. These modes operate independently. Make sure “AUTO.P” is not displayed in the upper part of the screen. ●...
  • Page 131 About AUTO.P Because the AUTO.P function can be used to temporarily save channels for the preset switches, channels saved manually will remain in memory even if AUTO.P is used. Manually saving channels that are used regularly allows them to be restored even after AUTO.P has been used, such as after traveling.

  • Page 132: Switching The Multiplex Voice Broadcasting

    How to operate the tuner when an optional TV tuner has been connected How to use the TV Switching the multiplex voice broadcasting When the multiplex voice broadcasting is being received, main voice and sub voice can be switched. Touch Touch FUNC Touch...

  • Page 133: Ch Decoder/Av Matrix Unit Connected

    How to operate the unit with an optional 5.1 ch decoder/AV matrix unit connected 1. Before adjusting sound quality Functions available when the optional 5.1 ch decoder/AV matrix unit is connected The following table shows the finer audio adjustments that can be performed when the optional 5.1 ch decoder/AV matrix unit is connected.

  • Page 134: About Parametric Eq

    Download sound adjustment data from the ECLIPSE website (E-iSERV) that matches the vehicle's interior and store it in the unit.
  • Page 135 [Parametric equalizer characteristics] 1. Median frequency can be varied. [Sound pressure] 2. Gain can be varied. [Sound pressure] 3. Q (sharpness/bandwidth) can be varied. [Sound pressure] High [Frequency] High [Frequency] High [Frequency] High High High...

  • Page 136: About Time Alignment

    How to operate the unit with an optional 5.1 ch decoder/AV matrix unit connected Before adjusting sound quality About time alignment With vehicle audio systems, the installation position of the speakers and the position of the listener mean that the distances from the listener to the left and right speakers are almost always different.

  • Page 137: About Crossover

    The frequency band that is stored by audio media such as CDs is a fairly wide range from 20 Hz to 20 kHz, and it is difficult for a single speaker to be able to play back all frequencies in such a wide range.

  • Page 138: About E-Iserv Sound Effect Customizations

    How to operate the unit with an optional 5.1 ch decoder/AV matrix unit connected Before adjusting sound quality About E-iSERV sound effect customizations The parametric equalizer, time alignment and crossover settings can be adjusted using this unit, or through the E-iSERV website. About the automatic parametric equalizer This function can be used to automatically correct distortion in frequency characteristics (peaks and dips) based on the results of measuring the frequency characteristics inside the...

  • Page 139: Adjusting Sound Quality

    How to operate the unit with an optional 5.1 ch decoder/AV matrix unit connected 2. Adjusting sound quality Sound quality can be adjusted in all audio operation screens. Displaying the sound adjustment screen Touch SOUND ● Touch in the VTR operation NEXT screen, or in the DVD operation...
  • Page 140 How to operate the unit with an optional 5.1 ch decoder/AV matrix unit connected Adjusting sound quality ● Setting screen ● Speaker level setting screen SP LEVEL ● Time alignment adjustment screen SP SETTING ● Crossover setting screen X-OVER...

  • Page 141: Adjusting Peq (Parametric Equalizer)

    Adjusting PEQ (Parametric equalizer) If the optional 5.1 ch decoder/AV matrix unit is connected, the parametric equalizer can be used to perform a 5-band adjustment of each of the front, center, and rear channels, and a 1- band adjustment of the woofer for a total of a 16-band adjustment. Each band can be set to the following median frequencies: Channel Band...

  • Page 142: Adjusting/Saving A Peq

    How to operate the unit with an optional 5.1 ch decoder/AV matrix unit connected Adjusting sound quality Touch in the sound adjustment screen. Touch FRONT CENTER WOOFER the channel to be adjusted. Touch BAND to select the band to be adjusted. BAND ●...
  • Page 143 Touch to select the Q curve pattern. ● Each time the switch is touched, the Q curve pattern will be changed in the order shown below. (Sharp) (Middle Sharp) Repeat steps through change the setting for each channel and band. ●...

  • Page 144: Selecting A Peq Pattern From Memory

    How to operate the unit with an optional 5.1 ch decoder/AV matrix unit connected Adjusting sound quality Selecting a PEQ pattern from memory Touch a switch from ● The preset pattern stored in memory will be retrieved. BACK ● Touch settings.

  • Page 145: To Measure Each Channel Separately

    CANCEL ● Touch to cancel measurement. To measure each channel separately Insert the “Memory Stick Duo”. Touch MEASURE for more than 2 seconds, until you hear a beep. ● After touching the switch, a 10-second count down begins. Leave the vehicle during that time.

  • Page 146: Adjusting Pos (Positioning Selector)

    How to operate the unit with an optional 5.1 ch decoder/AV matrix unit connected Adjusting sound quality Adjusting POS (Positioning selector) Sound localization can be adjusted according to the number and position of passengers in order to obtain optimum acoustic effects. A seat's sound localization can be adjusted simply by touching a switch.

  • Page 147: Setting The Balance

    Setting the balance The left/right/front/rear balance can be adjusted so that sound from all speakers arrives at the listener's ears at the same time. FADER BALANCE Touch POSITION setting screen to display the volume balance adjustment screen. Touch the screen at the preferred balance point.

  • Page 148: Setting Loudness

    How to operate the unit with an optional 5.1 ch decoder/AV matrix unit connected Adjusting sound quality Setting LOUDNESS Audio can be modulated to correct for insufficient bass and treble when listening at low volume. Touch LOUDNESS. ● The selected touch switch will turn light blue.

  • Page 149: Setting/Adjusting The Surround System

    Setting/Adjusting the surround system Dolby Digital (5.1 ch), DTS (5.1 ch), LPCM, and Dolby Pro Logic II are supported when the optional 5.1 ch decoder/AV matrix unit is connected. Playing discs recorded using these technologies allows the listener to enjoy theater-quality sound within a limited space. Setting the Dolby Pro Logic II Dolby Pro Logic II expands sound recorded in stereo (2 ch) for a rich listening experience.

  • Page 150: Setting The Center Level

    How to operate the unit with an optional 5.1 ch decoder/AV matrix unit connected Adjusting sound quality Adjusts the dialog and music output level heard from center speaker. Touch LEVEL. ● The center level can be adjusted within -10 to 10 (in units of one). : Increase the level.

  • Page 151: Setting The Center Width

    Setting the CENTER WIDTH When Dolby Pro Logic II is set to MUSIC and the center speaker is set to LARGE or SMALL, sound from the center speaker is distributed to the left and right front speakers. Touch for CENTER WIDTH.

  • Page 152: Setting The Compression

    How to operate the unit with an optional 5.1 ch decoder/AV matrix unit connected Adjusting sound quality Compression adjusts the sound sensation range, or the difference between maximum and minimum when playing a DVD with Dolby Digital (5.1 ch) or DTS (5.1 ch). Raising the numerical value of the compression level will narrow the sound range so that dialog and voice will be easier to hear even when background sounds are intense.

  • Page 153: Setting/Adjusting The Speakers

    Setting/Adjusting the speakers Settings and adjustments can be made to fit the speakers connected to the unit. The following settings and adjustments can be performed when the optional 5.1 ch decoder/ AV matrix unit is connected. ● Speaker system ● Time alignment ●...

  • Page 154: Adjusting Time Alignment

    How to operate the unit with an optional 5.1 ch decoder/AV matrix unit connected Adjusting sound quality The delay time and level of the sound from each speaker can be adjusted in order to correct any phase mismatches in the sound resulting from the listening position. In addition, the optional 5.1 ch decoder/AV matrix unit has a function for automatically correcting time alignment.
  • Page 155 ●Refer to the following for the method of calculating the delay time. A = (B-C)/34 A: Delay time (ms) B: Distance from listening position to the farthest speaker (cm) C: Distance from listening position to the speaker to be adjusted (cm) <Example>...

  • Page 156: Automatic Adjustment

    How to operate the unit with an optional 5.1 ch decoder/AV matrix unit connected Adjusting sound quality Connect the accessory microphone with an optional 5.1 ch decoder/AV matrix unit. ● Align the microphone with the actual ear position and attach it to the headrest or other appropriate fixture.

  • Page 157: Adjusting Crossover

    Allocate specified frequency bands to each speaker for improved sound integration. SETTING Touch in the sound adjustment screen. X-OVER Touch in the setting screen. Touch individual speakers to select the speaker to be adjusted. FRONT MID ● Each time HPF (High Pass Filter) and LPF (Low Pass Filter) are switched.
  • Page 158 How to operate the unit with an optional 5.1 ch decoder/AV matrix unit connected Adjusting sound quality Touch FREQUENCY to select the cut off frequency. ● : Increase cut off frequency : Decrease cut off frequency ● The following cut off frequencies can be selected.

  • Page 159: Adjusting Sub-Woofer Output Level

    Adjusting sub-woofer output level When a sub-woofer is connected, the preferred output level for the audio can be set. SETTING Touch in the sound adjustment screen. X-OVER Touch in the setting screen. WOOFER Touch Touch for LEVEL to adjust the sub-woofer output level. ●...

  • Page 160: Setting Phase Control

    How to operate the unit with an optional 5.1 ch decoder/AV matrix unit connected Adjusting sound quality The merging of sound between the front and rear speakers and the sub-woofer can be improved by selecting the phase. Switch to a phase which lets the speakers combine without any disharmony.

  • Page 161: Adjusting Speaker Levels

    Adjusting speaker levels SETTING Touch in the sound adjustment screen. SP LEVEL Touch in the setting screen. Touch for each speaker to adjust the speaker level. ● The speaker level can be adjusted within -10 to 0 dB (in units of 0.1 dB). : Increase the level.

  • Page 162: Adjusting Speaker Size

    How to operate the unit with an optional 5.1 ch decoder/AV matrix unit connected Adjusting sound quality SETTING Touch adjustment screen. SP LEVEL Touch screen. CENTER Touch WOOFER to set the speaker size. ● Each time switch for each speaker is touched, the speaker size will be changed in the order shown below.
  • Page 163 ■ Speaker settings and functions Speaker Size NONE Center SMALL LARGE NONE Rear SMALL LARGE Woofer Function Distributes output to the center speaker to the front left and right speakers. This setting is used when the speakers connected to the unit are unable to output frequencies lower than 100Hz.

  • Page 164: Importing Sound Data

    How to operate the unit with an optional 5.1 ch decoder/AV matrix unit connected Adjusting sound quality Importing sound data Sound data adjusted using the E-iSERV website can be downloaded to a “Memory Stick Duo” and imported into the unit. Insert the “Memory Stick Duo”...
  • Page 165 Touch the file name to select the saved file. Touch ● to move the list. Touch LOAD Select a preset switch through ● Sound data will be recorded for the selected switch. CANCEL ● Touch to cancel data saving. Continue to the next page...
  • Page 166 How to operate the unit with an optional 5.1 ch decoder/AV matrix unit connected Adjusting sound quality Do not turn the power or ignition switch off while the system is reading data. Interrupting the data reading process can corrupt the data. <When using a “Memory Stick Duo”>...

  • Page 167: Display Settings

    How to operate the unit with an optional 5.1 ch decoder/AV matrix unit connected 3. Display settings Screen settings when the optional 5.1 ch decoder/ AV matrix unit is connected Up to two external monitors can be connected when the 5.1 ch decoder/AV matrix unit is connected.
  • Page 168 How to operate the unit with an optional 5.1 ch decoder/AV matrix unit connected Display settings Touch VTR 1 to select an image. HEAD UNIT VTR 1 ● : Outputs images and sounds from VTR1 to the external monitor VTR 2 : Outputs images and sounds from VTR2 to the external monitor...

  • Page 169: How To Use Aux

    How to operate the unit with an optional 5.1 ch decoder/AV matrix unit connected 4. How to use AUX It is possible to connect a portable audio player or similar device to a DIGITAL terminal of the 5.1 ch decoder/AV matrix unit for playback. VOL button Listening to AUX Switching to AUX using the touch switches...

  • Page 170: Switching The Aux Input

    How to operate the unit with an optional 5.1 ch decoder/AV matrix unit connected How to use AUX Switching the AUX input The AUX input can be switched depending on the terminals connected to the 5.1 ch decoder/ AV matrix unit. Touch DIGITAL1 to switch the input mode.

  • Page 171: Important Points

    For reference 1. Important Points If one of these messages appears If any of the following messages are displayed, check the unit while referring to the cause and corrective action columns. Message CD SEEK CD DOOR OPEN CHECK DISC NO DISC NO CD CD ERROR DVD ERROR...
  • Page 172 For reference Important Points Message This Memory Stick is not available. There are no playable files. Can not read disc due to guard. HDD has stopped. (Overheating) HDD has stopped. (Cooling) There is no database to update. PARENTAL LOCK ENABLED THIS FUNCTION IS CURRENTLY DISABLED INVALID CODE...

  • Page 173: Before Asking For Repairs

    Before asking for repairs Slight differences in operation can sometimes be mistaken for malfunctions, so check the following table before requesting any repairs. If the following fail to solve the problem, contact your local retailer. Symptom The screen is dark for a brief period when the power is turned on at low temperatures.
  • Page 174 For reference Important Points Symptom Neither video nor audio is output. There is a point of light on the display. The Audio screen is distorted by electrical noise. Possible reason The vehicle ignition switch has not been turned on. The connection cord is not completely connected.

  • Page 175: Other

    For reference 2. Other Products equipped with Dolby Digital Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. ©1992-1997 Dolby Laboratories, lnc. All rights reserved. Manufactured under license from Dolby Laboratories, Inc. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

  • Page 176: Glossary

    For reference 3. Glossary (Compact Disc Recordable) (Compact Disc Digital Audio) (Compact Disc ReWritable) (MPEG-1 Audio Layer-3) (Universal Disc Format) This is a disc that can only be recorded once. CD-R Recorded data cannot be deleted. There are two types of CD-R, one having a capacity of 650MB (74 minutes of music), the same as a regular CD, and the other having a capacity of 700MB (80 minutes of music).
  • Page 177 Track The single division for a song on a music CD is called a track. SCMS With digital recording, the deterioration of audio (Serial Copy quality is very low. Therefore digital recording Management System) equipment regulates, for the sake of copyright protection, the using of a sound source copied using a digital signal to be used to make further copies of the same data.

  • Page 178: Topic Index

    For reference 4. Topic index About screen and sound adjustment [Regarding screen adjustment] To make the audio operation screen or VTR screen easier to see "Displaying the image adjustment screen" ..... . P58 To turn off the screen "Turning the screen off"...

  • Page 179: About Using Am/Fm Radio

    ● To adjust the MP3 sound "Setting the harmonizer" ........P45 ●...

  • Page 180: About Using The Cd Player And Cd Changer

    For reference Topic index To display information screen "Displaying information about the current track" ....P77 About using the CD player and CD changer To play a CD "Listening to a CD"...

  • Page 181: About Using The Memory Stick Player

    About using the Memory Stick player To listen to Memory Stick data "Listening to Memory Stick data" ......P94 To select a song "Selecting a track"...

  • Page 182: About Using Optional 5.1 Ch Decoder/Av Matrix Unit

    For reference Topic index To change the display of touch switches "Changing the touch switch display locations"....P113 To change subtitles, audio or the video angle "Changing the angle"...

  • Page 183: When Something Isn't Clear

    ● To adjust the surround system "Setting/Adjusting the surround system" ..... . P149 ● To set the speakers "Setting/Adjusting the speakers" ......P153 ●...

  • Page 184: Index

    For reference 6. Index Adjusting the main volume Adjusting sound quality...32 ANGLE...114 AUTO.P ...66 BRIGHT ...60 CD-R (CD-Recordable)...19 CD-RW (CD-ReWritable)...19 COLOR ...60 CONTRAST ...60 Daytime display ...58 DISC RAND ...100 DISC RPT ...99 EQ...35 HD radio...68 HOME ...85 How to use the AM/FM radio ...63 How to use the CD changer...98 How to use the CD player...78 How to use the DVD player ...107...

Table of Contents