Trip Computer Screen - Eclipse AVN726EA Owner's Manual

Operation
Navigation Overview
Symbol

■ Trip computer screen

The Trip computer screen provides collected trip data. Touch [Trip Computer] on the Trip
information screen to open the Trip computer screen.
The fields on this screen are continuously updated while the screen is open.
You can switch between trips, pause and resume a trip, or reset.
You have the following functions on this screen:
Name
[Pause]
[Reset]
60
60
This value is not shown on the Map screen.
This value appears on the Map screen in the Trip Data area. This is the
value at the top.
This value appears on the Map screen in the Trip Data area. This is the
value in the middle.
This value appears on the Map screen in the Trip Data area. This is the
value at the bottom.
Pauses the trip currently shown on the screen. Values on the screen
stop changing.
Resets all counters of the currently shown trip. The collection of trip
data is restarted only when Navigation receives a position from the
GPS.
Cycles through all trips.
Description
Description