Huffy Mountain Bikes Owner's Manual page 11

Handlebar and Stem Installation
WARNING: To prevent steering system damage and possible loss of control,
completely seat Stem (1) onto Fork Tube (E).
Threadless Style Stem:
Note: This procedure applies to both
the two-bolt Stem and four-bolt Stem
(fi gs 01b and 01c):
1. Insert the Stem (1) onto the Fork
Tube (E).
2. Point the Stem (1) towards the
front of the bike and in line with
the fork.
3. Tighten the stem bolts (C) se-
curely.
4. Place Cap into stem and tighten
screw securely (D).
WARNING: Do not over tighten
the stem bolts (C). Over tightening the
stem bolts can damage the steering
system and cause loss of control.
WARNING: The Front Brake
(28) must be positioned in FRONT of
the Fork (4) (fi g 01a)
D
C
D
C
1
E
fig 01b
1
E
fig 01c
11