Introduction; Tools Needed - Huffy 700c Owner's Manual

Introduction

This Owner's Manual is made for several different bicycles:
• Some illustrations may vary slightly from the actual product.
• Follow instructions completely.
• If the bicycle has any parts that are not described in this manual, look for sepa-
rate "Special Instructions" that are supplied with the bicycle.
• Models may have different accessory items such as bags, baskets, refl ectors,
cup holders, racks, etc.
• All features, components and accessories are not included on all models.
• Use the Index page to locate specifi c sections of this manual.
• Please read through this entire manual before beginning assembly or mainte-
nance.
• If you are not confi dent with assembling this unit, refer to a local bike shop.
WARNING: Keep small parts away from children during assembly.
NOTE: All of the directions (right, left, front, rear, etc.) in this manual are as seen by
the rider while seated on the bicycle.
Do not dispose of the carton and packaging until you complete the assembly of the
bicycle. This can prevent accidentally discarding parts of the bicycle.

Tools Needed

Small Adjustable Wrench
(Jaws must open at least 9/16 inch.)
Flat-blade Screwdriver
Slip-Joint Pliers
8
Open-end Wrenches
Phillips Screwdriver
Metric Allen Wrenches