Advanced Wireless Settings - D-Link DSR-150 User Manual

Unified Services Router
WDS Encryption - Displays the type of encryption used. It could be one of OPEN/64 bit WEP/128 bit
WEP/TKIP/AES (Use the term being used throughout the box i.e. either CCMP or AES).
WDS Passphrase - This is required if the encryption selected is TKIP/CCMP. We would expect it to
be within 8~63 ASCII characters. In the WDS configuration page this field is mandatory and has to be
same on the two WDS peers, when the security is configured in TKIP/AES mode. The WDS links use
this as the PSK for the connection.
DUT's Mac Address - This would be the mac address of this box. This should be configured in the
peer's WDS configuration page to be able to establish a WDS link with this box. This field in the
WDS Configuration section displays the device's mac address, which needs to be specified on the
WDS peer for making a connection to this device (Similarly the WDS peers MAC address will have to
be specified on this device for the WDS link to be established between the two devices).
The second section will have the list of configured WDS peers with buttons to Add/Delete Peer
entries. We support up to a maximum of 4 WDS links per box.

The both devices need to have same wireless settings (wireless mode, encryption, authentication
method, WDS passphrase, WDS MAC address and wireless SSID) when we configure WDS features in
DSR router.
The "Add WDS Peer" section allows the user to specify a WDS peer. The "WDS Peers" table displays
the list of WDS peers currently configured on the device. A maximum of 4 WDS peers can be
specified in any given mode.
4.7

Advanced Wireless Settings

Advanced > Wireless Settings > Advanced Wireless
Sophisticated wireless administrators can modify the 802.11 communication parameters in this page.
Generally, the default settings are appropriate for most networks. Please refer to the GUI integrated
help text for further details on the use of each configuration parameter.
77
User Manual