Table of Contents
Advertisement
Section 3 - Configuration
Transmit Power:
Set the transmit power of the antennas.
Beacon Period:
Beacons are packets sent by an Access Point to synchronize a
wireless network. Specify a value. 100 is the default setting and
is recommended.
RTS Threshold:
This value should remain at its default setting of 2432. If
inconsistent data flow is a problem, only a minor modification
should be made.
Fragmentation
The fragmentation threshold, which is specified in bytes,
Threshold:
determines whether packets will be fragmented. Packets
exceeding the 2346 byte setting will be fragmented before
transmission. 2346 is the default setting.
DTIM Interval:
(Delivery Traffic Indication Message) 3 is the default setting. A
DTIM is a countdown informing clients of the next window for
listening to broadcast and multicast messages.
WMM Function:
WMM is QoS for your wireless network. This will improve
the quality of video and voice applications for your wireless
clients.
Short GI:
Check this box to reduce the guard interval time therefore
increasing the data capacity. However, it's less reliable and may
create higher data loss.
L7-N-R2000 User Manual
Advanced Wireless Settings
39
Advertisement
Table of Contents
