3.2.8 Checking Wan Status - D-Link DSR-150 User Manual

Unified Services Router

Password: Enter the password required to login to the ISP.

Authentication Type: The type of Authentication in use by the profile: Auto-
Negotiate/PAP/CHAP/MS-CHAP/MS-CHAPv2.

Dhcpv6 Options: The mode of Dhcpv6 client that will start in this mode: disable
dhcpv6/stateless dhcpv6/stateful dhcpv6/stateless dhcpv6 with prefix delegation.

Primary DNS Server: Enter a valid primary DNS Server IP Address.

Secondary DNS Server: Enter a valid secondary DNS Server IP Address.
Click Save Settings to save your changes.

3.2.8 Checking WAN Status

Setup > Internet Settings > WAN1 Status
The status and summary of configured settings for both WAN1, WAN2 and WAN3 are available on
the WAN Status page. You can view the following key connection status information for each WAN
port:

Connection time: The connection uptime

Connection type: Dynamic IP or Static IP

Connection state: This is whether the WAN is connected or disconnected to an ISP. The
Link State is whether the physical WAN connection in place; the Link State can be UP (i.e.
cable inserted) while the WAN Connection State is down.

IP address / subnet mask: IP Address assigned

Gateway IP address: WAN Gateway Address
43
User Manual