D-Link DSR-150 User Manual page 260

Unified Services Router
__FUNCTION__
%s: failed to register sysctls!,
proc_name
PKTLOG_TAG %s: proc_mkdir failed,
__FUNCTION__
PKTLOG_TAG %s: pktlog_attach failed
for %s,
PKTLOG_TAG %s:allocation failed for
pl_info, __FUNCTION__
PKTLOG_TAG %s:allocation failed for
pl_info, __FUNCTION__
PKTLOG_TAG %s: create_proc_entry
failed for %s,
PKTLOG_TAG %s: sysctl register failed
for %s,
PKTLOG_TAG %s: page fault out of
range, __FUNCTION__
PKTLOG_TAG %s: page fault out of
range, __FUNCTION__
PKTLOG_TAG %s: Log buffer
unavailable, __FUNCTION__
PKTLOG_TAG
Logging should be disabled before
changing bufer size
%s:allocation failed for pl_info, __func__
%s: Unable to allocate buffer, __func__
%s:allocation failed for pl_info, __func__
%s: Unable to allocate buffer, __func__
Atheros HAL assertion failure: %s: line
%u: %s,
ath_hal: logging to %s %s,
ath_hal_logfile,
ath_hal: logging disabled
%s%s, sep, ath_hal_buildopts[i]
failed to allocate rx descriptors: %d,
error
ath_stoprecv: rx queue %p, link %p,
no mpdu (%s), __func__
Reset rx chain mask. Do internal reset.
(%s), __func__
OS_CANCEL_TIMER failed!!
%s: unable to allocate channel table,
__func__
%s: unable to collect channel list from
hal;
%s: cannot map channel to mode; freq
%u flags 0x%x,
%s: unable to reset channel %u
(%uMhz)
%s: unable to restart recv logic,
%s: start DFS WAIT period on channel
%d, __func__,sc->sc_curchan.channel
DEBUG PPP: VJ uncompressed error
DEBUG ppp_decompress_frame: no memory
ppp_mp_reconstruct bad seq %u <
DEBUG %u,
DEBUG PPP: couldn't register device %s (%d),
ppp: destroying ppp struct %p but
DEBUG dead=%d
DEBUG ppp: destroying undead channel %p !,
PPP: removing module but units
DEBUG remain!
DEBUG PPP: failed to unregister PPP device
DEBUG JBD: bad block at offset %u,
DEBUG JBD: corrupted journal superblock
DEBUG JBD: bad block at offset %u,
DEBUG JBD: Failed to read block at offset %u,
DEBUG JBD: error %d scanning journal, err
DEBUG JBD: IO error %d recovering block
DEBUG ./Logs_kernel.txt:303:KERN_ERR
DEBUG ./Logs_kernel.txt:304:KERN_ERR
DEBUG JBD: recovery pass %d ended at
DEBUG %s: %s:%d: BAD SESSION MAGIC \
DEBUG %s: %s:%d: BAD TUNNEL MAGIC \
msg->msg_namelen wrong, %d, msg-
DEBUG >msg_namelen
addr family wrong: %d, usin-
DEBUG >sin_family
udp addr=%x/%hu, usin-
DEBUG >sin_addr.s_addr, usin->sin_port
DEBUG %s: %s:%d: BAD TUNNEL MAGIC
DEBUG %s: %s:%d: BAD TUNNEL MAGIC
DEBUG socki_lookup: socket file changed!
DEBUG %s: %s:%d: BAD TUNNEL MAGIC
DEBUG %s: %s:%d: BAD SESSION MAGIC \
DEBUG %s: %s:%d: BAD TUNNEL MAGIC \
msg->msg_namelen wrong, %d, msg-
DEBUG >msg_namelen
addr family wrong: %d, usin-
DEBUG >sin_family
udp addr=%x/%hu, usin-
DEBUG >sin_addr.s_addr, usin->sin_port
259
User Manual
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR