Checking Wan Status; Figure 14: Ipv6 Wan Setup Page - D-Link DSR-500 User Manual

Unified Services Router
When the ISP allows you to obtain the WAN IP settings via DHCP, you need to
provide details for the DHCPv6 client configuration. The DHCPv6 client on the
gateway can be either stateless or stateful. If a stateful client is selected the gateway
will connect to the ISP's DHCPv6 server for a leased address. For stateless DHCP
there need not be a DHCPv6 server available at the ISP, rather ICMPv6 discover
messages will originate from this gateway and will be used for auto configuration. A
third option to specify the IP address and prefix length of a preferred DHCPv6
server is available as well.

Figure 14: IPv6 WAN Setup page

3.2.6 Checking WAN Status

Setup > Internet Settings > WAN Status
The status and summary of configured settings for both WAN1 and WAN2 are
available on the WAN Status page. You can view the following key connection
status information for each WAN port:
Connection time
Connection type: dynamic IP or static IP
29
User Manual