Storing A Pause In Memory; Dialing A Stored Number; Memory Delete/Clear - RCA 25425RE1 User Manual

Memory
4. Add the name as explained in the Storing A Name and Number in Memory section.
5. Press the STORE button. ENTER LOCATION shows in the display.
6. Press the DIR button to store the redial number in the Phone Book memory or press
an INTERCOM/MEMORY LOG button (1-16) to store the redial number in that memory
location.

Storing a Pause in Memory

Press the #PAUSE button twice to insert a pause in the dialing sequence of a stored
telephone number when a pause is needed (for example, when you must dial a 9 to get an
outside line or when you must enter codes to access your bank's information line).

Dialing a Stored Number

1. Pick up the handset, or press SPEAKER to automatically select a line. Or press the line
you want to use.
2. Wait for a dial tone.
3. Press the INTERCOM/MEMORY LOG button (1-16) for the person you want to call.
The number automatically dials.
OR
1. Press the DIR button.
2. Use the VOL (+ or -) buttons to scroll up or down through the phone book memories, or
use the touch tone pad to enter the corresponding letters for the memory you want to
review. For example, press the 5 key to display phone book memories that start with the
letter J. Press the 5 key twice to go to memories starting with the letter K.
3. Press the DIAL button. The number automatically dials.

Memory Delete/Clear

To delete a Phone Book memory:
1. Press the DIR button.
2. Use the VOL (+ or -) buttons to scroll up or down to the memory you want to delete.
3. Press the DELETE button to delete. DELETE -DELETE AGAIN shows in the display.
4. Press the DELETE button again to confirm.