Plantronics Blackwire C710 User Manual page 16

Headset controls, indicators and voice prompts
Action
Incoming PC call N/A
alert
PC Call answer/end Short press the PC
Talk button
PC Call "Flash" Two second Press
the PC Talk Button
Adjust the listen Press volume up/
volume (during a volume down bar
call)
Muting your Press and release
microphone the Mute Button
Mobile (Bluetooth) Press the Mobile
Power on/off Talk button for 5
seconds
Check if Mobile Short press the
(Bluetooth) is Mobile Talk button
powered on
Incoming Mobile N/A
call alert
Mobile Call Short press the
answer/end Mobile Talk button
Reconnect Mobile Short press the
Phone after leaving Mobile Talk button
range for more
than 30 seconds
Mobile redial last Double Press the
number * Mobile Talk button
Mobile Activate Press and hold the
Voice Dialling * Mobile Talk button
for 2 seconds
LeD Tone
Rapid green flash Programmable
ringtone
Short green flash Answer: Single low
tone followed by low-
low-high tones End:
Single low tone
Short green flash Low Tone
Single PC LED Tone at each change
flash in volume. Double
tone when min/max
volume level reached
On: Mute LED On On: Low-High Tones
Off: Mute LED Off Off: High-Low Tones
On: solid blue for N/A
2 seconds
Off: solid red for 2
seconds
Short blue flash Short Low Tone
Rapid blue flash Programmable
ringtone
Short blue flash Answer: Single low
tone followed by low-
low-high tones
End: Single low tone
Single blue flash Single low tone
Two blue flashes Two low tones
followed by low-low-
high tones
Single blue flash Short low tone,
followed by long low
tone
Voice prompt
N/A
N/A
N/A
N/A
On: "Mute On"
Off: "Mute Off"
On: "Power on"
followed by "Phone
Connected",
"No Phone is
connected", or
"Pairing".
Off: "Power off"
N/A
N/A
N/A
"Phone connected"
N/A
N/A
16