Plantronics Blackwire C310 Quick Setup Manual

Blackwire C310
®
Welcome:
Using a Plantronics Blackwire headset
for PC calls will deliver a simpler, more
comfortable and better sounding audio
experience than you could get using just
your computer's internal microphone
and speaker.
C
B
A
*This picture shows the
Stereo (C320) version
Control Functions:

A. Mute Microphone

B. Volume Adjust

C. Call Answer/End
Blackwire C310/C320 Key Features:

Wideband audio with noise-canceling
microphone for high quality PC audio

Indicator lights and audio alerts give call,
mute, and volume status

Dynamic EQ feature automatically
adjusts audio for voice or multimedia use

Monaural (C310), Stereo (C320)
©2012 Plantronics, Inc. All rights reserved. Plantronics, Blackwire, C310 and C320 are trademarks or registered trademarks of Plantronics, Inc. Cisco and Cisco WebEx Connect are registered trademarks of Cisco Systems, Inc. and/or affiliates in the U.S.
and other countries. Published 03.12
/C320 Quick Setup Guide
™ ™
Getting started:
Follow the steps below to get call answer/end controls
with your Blackwire headset and Cisco® Unified
Communications Integration for Cisco WebEx
Connect®.
1. Connect your headset to the computer. If this
is the first time you are connecting, wait for
the installation process to complete.
To get call control features, please download
2.
the latest version of Plantronics software at
plantronics.com/software.
Note: Check with your IT staff before installing
software on your computer.
Configuring Cisco Unified Communications Integration
for Cisco WebEx Connect to always route call audio to
the headset:
3. Click Edit in the upper left corner of the Cisco
WebEx Connect main screen.
4. Then select Settings.
5. Next choose Audio/Video.
6. Select your Plantronics headset in the drop
down for both Speakers and Microphone.
7. You can also adjust the Speakers and
Microphone volume in this screen.
8. When you are finished, select Save.
Note: USB configuration settings are unique for each USB
port. If you connect the headset to a different port you
will need to make these changes again to set behavior
for that USB port.
3
4
5
8
6
6