Power Management Setup - Gigabyte GA-780T-D3L User Manual

Onboard Audio Function
&
Enables or disables the onboard audio function. (Default: Enabled)
If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to
Disabled.
USB Controllers
&
Enables or disables the integrated USB controllers. (Default: Enabled)
Disabled will turn off all of the USB functionalities below.
USB Legacy Function
&
Allows USB keyboard to be used in MS-DOS. (Default: Enabled)
USB Storage Function
&
Determines whether to detect USB storage devices, including USB flash drives and USB hard drives during
the POST. (Default: Enabled)
Onboard Serial Port 1
&
Enables or disables the first serial port and specifies its base I/O address and corresponding interrupt.
Options are: Auto, 2F8/IRQ3, 3F8/IRQ4(default), 3E8/IRQ4, 2E8/IRQ3, Disabled.
Onboard Parallel Port
&
Enables or disables the onboard parallel port (LPT) and specifies its base I/O address and corresponding
interrupt. Options are: 378/IRQ7 (default), 278/IRQ5, 3BC/IRQ7, Disabled.
Parallel Port Mode
&
Selects an operating mode for the onboard parallel (LPT) port. Options are: SPP (Standard Parallel Port)
(default), EPP (Enhanced Parallel Port), ECP (Extended Capabilities Port), ECP+EPP.
ECP Mode Use DMA
&
Selects DMA channel for the LPT port in ECP mode. This item is configurable only if Parallel Port Mode
is set to ECP or ECP+EPP mode. Options are: 3 (default), 1.
2-7

Power Management Setup

CMOS Setup Utility-Copyright (C) 1984-2012 Award Software
ACPI Suspend Type
Soft-Off by Power button
USB Wake Up from S3
Modem Ring Resume
PME Event Wake Up
HPET Support
(Note)
Power On By Mouse
Power On By Keyboard
x KB Power ON Password
AC Back Function
Power-On by Alarm
x Date (of Month)
x Resume Time (hh:mm:ss)
ErP Support
: Move Enter: Select
F5: Previous Values
ACPI Suspend Type
&
Specifies the ACPI sleep state when the system enters suspend.
S1(POS) Enables the system to enter the ACPI S1 (Power on Suspend) sleep state. In S1 sleep

state, the system appears suspended and stays in a low power mode. The system can
be resumed at any time.
(Note) Supported on Windows 7/Vista operating system only.
Power Management Setup
[S3(STR)]
[Instant-off]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
Enter
[Soft-Off]
[Disabled]
Everyday
0 : 0 : 0
[Disabled]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 31 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults