Gigabyte GA-780T-D3L User Manual page 25

DQS Drive Strength
&
Options are: Auto (default), 0.75x, 1.0x, 1.25x, 1.5x.
Data Drive Strength
&
Options are: Auto (default), 0.75x, 1.0x, 1.25x, 1.5x.
MEMCLK Drive Strength
&
Options are: Auto (default), 0.75x, 1.0x, 1.25x, 1.5x.
Addr/Cmd Drive Strength
&
Options are: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
CS/ODT Drive Strength
&
Options are: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
CKE Drive Strength
&
Options are: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
** DCTs Addr/Cmd Timing **
Addr/Cmd Setup Time
&
Options are: Auto (default), 1/2T, 2T.
Addr/Cmd Fine Delay
&
Options are: Auto (default), 0/64~31/64.
CS/ODT Setup Time
&
Options are: Auto (default), 1/2T, 2T.
CS/ODT Fine Delay
&
Options are: Auto (default), 0/64~31/64.
CKE Setup Time
&
Options are: Auto (default), 1/2T, 2T.
CKE Fine Delay
&
Options are: Auto (default), 0/64~31/64.
Channel Interleaving
&
Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access
different channels of the memory to increase memory performance and stability. (Default: Enabled)
Bank Interleaving
&
Enables or disables memory bank interleaving. Enabled allows the system to simultaneously access
different banks of the memory to increase memory performance and stability. (Default: Enabled)
******** System Voltage Optimized ********
System Voltage Control
&
Determines whether to manually set the system voltages. Auto lets the BIOS automatically set the system
voltages as required. Manual allows all voltage control items below to be configurable. (Default: Auto)
DDR3 Voltage Control
&
Allows you to set memory voltage.
Normal Supplies the memory voltage as required. (Default)

1.100V ~ 1.900V The adjustable range is from 1.100V to 1.900V.

Note: Increasing memory voltage may result in damage to the memory or reduce the useful life of the
memory.
- 25 -