CPU Voltage Control
&
Allows you to set the CPU voltage. Auto sets the CPU voltage as required. The adjustable range is
dependent on the CPU being installed. (Default: Normal)
Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the CPU.
CPU NB VID Control
&
Allows you to set the CPU North Bridge VID voltage. Auto sets the CPU North Bridge VID voltage as
required. The adjustable range is dependent on the CPU being installed. (Default: Normal)
Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the CPU.
Normal CPU Vcore
&
Displays the normal operating voltage of your CPU.
Normal CPU Vcore NB
&
Displays the normal operating voltage of your CPU North Bridge.
2-4
Standard CMOS Features
CMOS Setup Utility-Copyright (C) 1984-2012 Award Software
Date (mm:dd:yy)
Time (hh:mm:ss)
IDE Channel 0 Master
IDE Channel 0 Slave
IDE Channel 1 Master
IDE Channel 1 Slave
IDE Channel 2 Master
IDE Channel 2 Slave
IDE Channel 3 Master
IDE Channel 3 Slave
Halt On
Base Memory
Extended Memory
: Move
Enter: Select
F5: Previous Values
Date (mm:dd:yy)
&
Sets the system date.
Time (hh:mm:ss)
&
Sets the system time.
IDE Channel 0, 1 Master/Slave
&
IDE HDD Auto-Detection
Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel.
IDE Channel 0, 1 Master/Slave
Configure your IDE/SATA devices by using one of the two methods below:
Auto
Lets the BIOS automatically detect
•
(Default)
None
If no
•
detection of the device during the POST for faster system startup.
Access Mode
Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large.
Standard CMOS Features
Thu,
Mar 1 2012
22:31:24
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[None]
[All, But Keyboard]
640K
1022M
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
IDE/SATA devices are used, set this item to None so the system will skip the
- 26 -
Item Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults
IDE/SATA devices during the POST.