Denon POA-3012CI - Multi-Zone Audio Distribution Power Amplifier Owner's Manual page 17

ENGLISH
[Selectable Channels]
For details of the channels which can be set in each mode. see
[Selectable Channelsl in
"0
OPERATION MODE" (!:'?page 13)
[Selectable items]
1·~g,.§iqJ'J
:
The power amplifier operates constantly.
tli~[li;i;!I!;J;'
:The power amplifier operates when trigger input is
detected.
When trigger input is not detected, it remains in
standby mode.
;~"':;,!!l!iLi, :
Very low display brightness.
~
. .
: :.J!~fusi.,
:
Display is off unless controls are operated.
II
When setting to "Dim': "Dark" and "OFF': the display brightness
changes to "Bright" for about 3 seconds during the operation before
reverting to the set brightness.
•
:Operate with the
ON/STANDBY
button only.
~~~~~=
rji!;~ii!!kq!I;~lIgii.~'i
:
Operate from an external device via Ethernet
or RS-232C input.
li;.autllllfi~~::1
:
Operate by detection of a trigger signal input
to the MASTER TRIGGER input terminal.
• Turns on when a signal is detected.
• If no input is received for a period of 10
minutes, it switches to standby mode.
The POA-3012CI accepts +3 - 30V trigger input.
ik;~1§!g~:i;,The
power amplifier operates when an audio signal is
input.
If no input is received for a period of 10 minutes. it
switches to standby mode.
:'J;J;ii;~!~~:d:JJJl :
Turns the power amplifier off.
.,
• The POA-3012CI accepts +3 - 30 V trigger input.
• Even when "ON LINE" or"MASTERTRIGGER" has been set. power
source operation is possible by means of
ON/STANDBY
button.
14