NEC Univerge SV8100 User Manual page 40

To call a stored Memo Dial number:
1. Do not lift the handset.
2. Press the Memo Dial key (Service Code 751:31).
3. Press the Speaker key.
-OR-
Press a configured Line key.
The stored number dials out.
Note:
MEMO DIAL
CONF
To check to see the stored Memo Dial number:
1. Do not lift the handset.
2. Press the Memo Dial key (Service Code 751:31).
Note: The stored number displays.
3. Press Exit to return to the main LCD screen.
To cancel (erase) a stored Memo Dial number:
1. Press the Speaker key.
2. Press the Memo Dial key (Service Code 751:31).
Repeat Redial
To use Repeat Redial (if the outside party you call is
unavailable or busy):
1. Place a trunk call.
Note: Listen for busy tone or Ring-No Answer.
2. Press the Feature + Redial keys.
-OR-
Press the Repeat Redial key (Service Code 751:29).
The Repeat Redial key lights while you wait
Note:
for the system to redial.
3. Press the Speaker key to hang up.
The system periodically redials the call.
Note 1:
System programming determines the waiting
Note 2:
time and the number of redial attempts.
4. Lift the handset when the called party answers.
Note: When using trunks with answer supervision,
the Repeat Redial feature automatically
cancels.
Line 001
Repeat Dial
Conf Rpt Save
34
00:27