Login (Dt700 Series Only); Logout (Dt700 Series Only) - NEC Univerge SV8100 User Manual

3.
B
ASIC

Login (DT700 Series Only)

When login mode is activated, the following procedure
is required.
Enter login code and press Set Softkey.
(The station number is used as the Login code.)
:
Login ID
Password
:
Cancel
Enter the password and press OK Softkey.
:
Login ID
Password :
Cancel
If the login code is accepted, display changes to
normal idle status.
28 APR MON 8:45AM
101
List Dir
O
PERATION
2000
BK Set OK
2000
*****
BK Set OK
STA 101
ICM Prog

Logout (DT700 Series Only)

Press the preassigned Logout Feature Key on the
terminal.
This location is an example.
Note:
Note: Logout button is assigned by data setting at
the ECP
Platform).
28 APR MON 8:45AM
101
List
"LOGOUT?" is displayed on the LCD of the
terminal.
28 APR MON 8:45AM
101
L-OUT
Press the Logout Feature Key on the terminal
again.
21
(Enterprise Communication
STA 101
Dir ICM Prog
LOGOUT ?
STA 101