Placing Calls - NEC Univerge SV8100 User Manual

Voice Announce Calls
1. Adjust the Speaker volume as needed.
Note 1: On SV8100 if MIC key is not lit the
user cannot answer voice announce
calls without lifting the handset.
2. Respond hands free.
Note 2: The handset may be used any time
during the conversation.
Camp-on (Call Waiting)
Receive the camp-on tone while on another call:
1. When a Camp On is set from another station,
complete the present call and a Call Back will ring
the station that set the Camp On.
2. When the Camp On station answers and rings the
phone, lift the handset or press the Speaker key.
Off Hook Signaling
With a call in progress:
1. Receive Off-Hook signaling.
2. Press the Answer key, then converse with the
second party.
2-11 MON 10:56AM
TALKING TO
Conf
STA 12345
The second call may be placed on Hold.
Note 3:
Press the flashing Line key or Conf key to
Note 4:
return to the first call.

PLACING CALLS

Internal Calls
1. Lift the handset.
2. Dial a station number or 0 (for attendant).
3. Voice announce after the tone burst, or wait for the
ringing call to be answered.
Outside Calls
1. Lift the handset.
2. Dial the trunk access code (i.e. 9).
-OR-
Press an idle Programmable Outside Line key.
3. Dial the telephone number.
4. Converse.
Line 001
Conf
24
00:15
2142622000
Rpt Save Trf