NEC Univerge SV8100 User Manual page 14

1.
(4) Exit
The user can exit from a screen mode by pressing
this key.
(5) Softkeys
Any feature shown at the bottom of the LCD is
available. The appropriate feature key is displayed
on the screen according to the call handling
process.
(6) Help
The user can press this key followed by a
programmable key to check what Line or
Programmable Feature is programmed on the key.
(7) Programmable Keys
These keys can be programmed as Flexible Line
key/Programmable Feature Key by the Telephony
Server Administrator. For the SV8100, the
programmable keys can be set by Web/PCPro and
the user can also set them.
(8) Recall
Press key to finish an outside call and hear the dial
tone.
(9) Feature
Used to activate any features as terminal setup
functions.
(10)Answer
When LED on this key is lit, press key to answer a
waiting call.
(11) Mic
Press this key to respond hands free.
(12) Menu
From this key, the user can access to the functions
not normally used (such as terminal settings,
downloads and access to XML applications)
easily.
(13) Cursor
By using this Key, DT Series user can access
various features with simple operation.
- 4-way Scroll UP key
- Volume (UP) key
- 4-way Scroll LEFT key
- Redial key
Two lines of menu items can be displayed at a
time. Use "Up" or "Down" key to scroll to the item.
8
- Enter Key
- Shortcut Key
- 4-way Scroll RIGHT key
- Directory key
- 4-way Scroll DOWN key
- Volume (DOWN) key