NEC Univerge SV8100 User Manual page 32

To dial a Station Speed Dialing number:
1. Press the Speaker key.
2. Dial #2 (default Service Code).
-OR-
Press the Redial key.
-OR-
Press the System Speed Dialing key (Service
Code 751:27).
To preselect, press a Line key in step 1
Note:
(instead of pressing Speaker).
3. Dial the Station Speed Dial buffer number (Default:
000~999).
The stored number dials out.
2-13 WED 5:28PM
92142622000
Conf Rpt
Initially (at default), there are 1000 System
Note 1:
Speed Dial buffers.
Unless you preselect, Trunk Group Routing
Note 2:
selects the trunk for the call. The system may
optionally select a specific Trunk Group for
the call.
NEC
Save Trf
If you have a DSS Console, you may be able to
Note 3:
press a DSS Console key to chain to a stored
number.
To dial a Group Speed Dialing number:
1. Press the Speaker key.
2. Dial #4 (default Service Code).
-OR-
Press the Redial key.
-OR-
Press the Group Speed Dialing key (Service Code
751:28).
Note: To preselect, press a Line key in step 1
(instead of pressing Speaker).
3. Dial the Group Speed Dial buffer number ( none at
default).
Note 1: Initially, there are no Group Speed Dial
buffers assigned.
Note 2: Unless you preselect, Trunk Group Routing
selects the trunk for the call. The system may
optionally select a specific Trunk Group for
the call.
If you have a DSS Console, you may be able to
Note 3:
press a DSS Console key to chain to a stored
number.
26