Three levels of protection are provided on the E5GN, operation/adjustment protection", initial
setting/communications protection" and setting change protection." These protect levels pre
vent unwanted operation of the keys on the front panel in varying degrees.
Power ON
Operation
level
1 second
min.
To
move
from
the
operation
the
and
keys for at least three seconds.
Operation/adjustment protection
Initial setting/communications protection
Setting change protection
This parameter specifies the range of parameters to be protected.
F
Operation/adjustment protection
The following table shows the relationship between set values and the range of
protection.
Function
Setting
Operation
O
level
level
Adjustment level
Parameter items are not protected when the set value is set to 0".
F
Initial setting/communications protection
This protect level restricts movement to the initial setting level and communication
setting level.
F
Setting change protection
Changes to setups by key operation are restricted.
Set value
OFF
ON
Adjustment
level
key
+
key
1 second min.
Control in progress
level
to
the
protect
Level
Level
0
f f f f
PV
PV/SP
Other
Set value
Move to initial setting level
Possible (move to advanced func
0
tion setting level enabled" parame
ter displayed)
Possible (move to advanced func
1
tion setting level enabled" parame
ter not displayed)
2
Not possible
Setup can be changed by key operation.
Setup cannot be changed by key operation. (The protect level can be changed.)
+
key
3 seconds min.
Protect
level
level,
press
The settings of protected parameters are not displayed
and so cannot be modified.
Set value
1
2
3
f
: Can be displayed and changed
: Can be displayed
f
: Cannot be displayed and move to
other levels not possible
Description
Protect Level
Protect level
Operation/adjustment
protection
Initial setting/commu
nications protection
Setting change
protection
indicates the default.
Move to communications setting level
Possible
Possible
Not possible
Page
5 3
5 3
5 3
5-3