Table of Contents
Advertisement
To verify whether the system is in Cold Weather Mode:
• (Automatic transmissions only) Press the brake pedal: If the vehicle is in Cold Weather
mode, the parking lights will remain ON while the brake pedal is pressed.
Extended Run Time
With the vehicle running under a remote start, pressing and holding the
3 seconds will reset the run time counter to zero and restart the run time cycle from the beginning.
The horn (if programmed) will honk once;
•
The parking lights will flash slowly 3 times then remain lit.
•
To stop the vehicle at any moment, simply press the
out once per remote start.
Example: If your Module is programmed for a runtime of 3 minutes and your vehicle has been
running for 2 minutes already, pressing the
will run for another cycle (in this case, 3 minutes).
Disable/Enable LED flashing
To disable the LED: Press
To Enable the LED: Press
Constant output
Pressing and holding the
constant pulse as long as the
pulse can be configured to activate certain functionalities such as rolling up the windows – Please
refer to your installer to see if your vehicle is compatible with this option.
Pressing and holding the
constant pulse as long as the
pulse can be configured to activate certain functionalities such as rolling down the windows –
Please refer to your installer to see if your vehicle is compatible with this option.
Advanced Features: Installationprogrammable Options
The Remote Car Starter was designed with flexibility and OEM integration in mind. With its
programmable options, this unit can single-handedly control nearly any electrical system in your
vehicle.
Caution: The programming of your system should be left to a professional. Changing any one of
the settings may affect the operation of your Remote Car Starter.
Ignitioncontrolled Door Locks
This is an added security feature. If your Remote Car Starter was installed with the Ignition-
Controlled Door Locks option, the doors will automatically lock as soon as the ignition key is turned
to the IGNITION ON (RUN) position while the brakes are pressed. The remote car starter will also
lock any door that was unlocked and opened (then closed) the next time the brake pedal is pressed
(only when doors are monitored). When the key is turned to the OFF position, the doors will
automatically be unlocked.
P.10
button will reset the counter to zero and the Engine
and
simultaneously until the parking lights flash 3 times.
and
simultaneously until the parking lights flash once.
button for more than 3 seconds will lock all doors and will send a
button is held down (maximum of 15 seconds). This constant
button for more than 3 seconds will unlock all doors and will send a
button is held down (maximum of 15 seconds). This constant
button. This procedure can only be carried
button for more than
User Guide
Hide quick links:
Advertisement
Table of Contents
