Names Of Lead Wires And Destinations - Eclipse CD8061 Owner's Manual

Mounting instruction
Notes

Names of lead wires and destinations

No.
1
2
3
4
5
6
7
8 & 9
10
11&12 Line-out terminals
13
14
15
16
17
100
To prevent unconnected leads from shorting out, insulate
them by wrapping their tips with electrical tape. Similarly,
insulate the ends of connected leads.
If an external amplifier is to be connected to the receiver,
be sure to ground its outside housing to the vehicle body
(a metal part).
Name
ACC
B+
Ground
Antenna power supply Blue
Lamp power supply
Control power supply
E-LAN terminal
Line-out terminals
Line-out terminals (Nonfader)
Line-out terminals (Nonfader)
Cellular phone mute
Eclipse Commander terminal
Digital out terminals
Line in terminal (for MP3)
(refer to Page 102)
Wire color Destination
Red Connect where the power comes on
when the ignition is in the ACC
position.
Yellow Connect where power is constantly
available, regardless of the ignition
switch's position.
Black Connect where good body grounding
is available.
Connect to the automatic-antenna
control terminal of the vehicle.
Orange/White Connect to where power comes on
when the headlights are turned on.
Blue/White Connect to the control terminal for the
external amplifier, etc.
Connect to the E-LAN terminal of the
CD changer, DSP, etc.
Connect to the RCA input connectors
of an external amplifier.
Connect to the RCA input connectors
of a DSP or EQ, or the RCA input
connectors of a woofer amplifier.
Connect to the RCA input connectors
of an external amplifier for BALANCE-
IN.
Connect to the RCA input connectors
of a DSP or EQ, or the RCA input
connectors of a woofer amplifier for
BALANCE-IN.
Pink Connect to the ground output terminal
on a mobile phone.
Connect to the Eclipse Commander
module.
Connect to digital terminals of the
Eclipse Commander module.
Connect to the mini plug
output connector of MP3 unit.
(φ3.5)