Eclipse CD8061 Owner's Manual page 80

How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected
Selecting a preset pattern from memory
Press a preset button to select the room size in memory.
The buttons under which room sizes are stored in memory
are called preset buttons.
1. After pressing the [FUNC] button, hold button [1]
2. Press a button, [1] to [6] for less than two seconds.
3. Press the [FUNC] button to cancel the DSP
80 80
Buttons [1] to [6]
down for more than one second.
The room size, as preset in the button, is selected.
adjustment mode.
[FUNC] button