Switching The Input Channel - Eclipse CD8061 Owner's Manual

How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected

Switching the input channel

If the button is pressed during normal radio reception, or when
playing back a CD, the input channel being used at that time
will be displayed, and you can then select an external input
channel.
1. Press the [FUNC] button.
2. Press button [6] for more than one second.
3. Press the [FUNC] button again.
90 90
The setting changes to Digital1
Analog1 Analog2 each time the button is pressed.
[DIGITAL 1 / DIGITAL 2 / DIGITAL] or [ANALOG 1 /
ANALOG 2] will appear on the display.
Initial settings
Radio mode
DVD player mode
CD player mode
CD changer mode
Use this operation to set the input channels for each
mode.
Button [6]
Digital2
: ANALOG 1
: DIGITAL 1 (optical input)
: DIGITAL 3 (RCA input)
: ANALOG 1
[FUNC] button
Digital3